BMG’s range of Fenner PowerTwist link belting is now available with SPA and SPB wedge profiles. This important upgrade enhances durability by combining the high performance of rubber with additional cost-saving benefits, including quick, effortless installation and a longer belt life. They are unaffected by abrasive dust, oil, grease, water and common industrial solvents. The easy-to-use twist-lock design is made to length by hand, so users always have the correct belt length available, without having to invest in a large stockholding.
PowerTwist link belting offers high resistance to abrasion and shock loads and can withstand extreme temperatures from -40 to 116°C. The advanced link design dampens transmitted motor vibrations, extending bearing life and reducing noise levels. It combines extremely high strength with low stretch, and has the same power ratings as conventional V-belts. The elasticity of woven polyurethane fabric enables these belts to be stretched over a pulley drive without any damage.
The BMG team recently assisted a customer who had excess working capital tied up in inventory and had to regularly re-tension or replace belts because they had stretched and lost efficiency as a result of heavy shock loads and high temperatures. Belt installation previously required many workers and it took hours to weld and dismantle drive components. In addition, bearings had to be changed at least once a month due to failure from drive vibration. The customer’s inventory has since been reduced to a few boxes of PowerTwist belts, which are made to the required length on site.
SEW-EURODRIVE drives innovation at automotive plant SEW-EURODRIVE
Motion Control & Drives
[Sponsored] A major automotive manufacturer in Gauteng has boosted its operational efficiency, safety and energy savings with the installation of SEW-EURODRIVE’s advanced MOVIGEAR mechatronic drive system in its newly expanded buffering zone.
Read more...Reimagining rotation for a circular and sustainable future SKF South Africa
Motion Control & Drives
Through the design and manufacture of components with sustainability at their core, SKF is reimagining the future of rotation, rolling away from traditional, consumable-based thinking toward a smarter, more sustainable circular approach.”
Read more...Optimising operational efficiencies through advanced filtration systems Bearing Man Group t/a BMG
Motion Control & Drives
Filtration is the only effective defense against wear and tear when contaminants are present. It is therefore critical that effective filter components are correctly used to ensure dependable performance, high efficiency and extended service life of machinery and vehicles.
Read more...Industrial valve solutions Bearing Man Group t/a BMG
Valves, Actuators & Pump Control
BMG’s Fluid Technology division supplies and supports an extensive range of components for fluid technology systems. These include valves, hydraulic hoses and fittings, accumulators, cylinders, heat exchangers, hydraulic motors and hydraulic plumbing, as well as pumps and reservoir accessories.
Read more...A world first in maintenance
Motion Control & Drives
Lutz Pumpen has therefore developed a filling tool called Lutz Lube Drive, which considerably simplifies the maintenance process. The idea is that a commercial cordless screwdriver becomes the motor of a pump tube.
Read more...The future of robotics
Motion Control & Drives
Research into robotics and autonomy uncovers some of the up-and-coming industrial uses and applications within the sector, including for automotives and logistics, as well as for personal and commercial use.
Read more...Epiroc strengthens productivity and sustainability
Motion Control & Drives
Epiroc is accelerating the transformation towards more productive and sustainable mining operations with the introduction of the new Minetruck MT22. The new 22-ton underground truck is designed for mining operations with small drift sizes, delivering increased effectiveness, reduced exhaust emissions, lower fuel consumption and extended service intervals.
Read more...Hoist gives better load control
Motion Control & Drives
An important criterion for lifting equipment is that it is correctly loaded and balanced in order to avoid mechanical failures and accidents. More importantly, operator safety is enhanced as a result of correct load control, which reduces the possibility of damage to the materials and goods being lifted.
Read more...PC-based control in window and door production Beckhoff Automation
Motion Control & Drives
Belgian machine builders CNC Solutions and Calvet are automating previously manual processes in aluminium window and door production. High-performance drive technology, motion control and electric cylinders from Beckhoff proved crucial in equipping the machine with the necessary finesse when pressing the window frames.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version