Pushing past the brink

July 2023 Editor's Choice Motion Control & Drives

Brink Towing Systems is the global leader in developing and manufacturing towbars. Since the end of the pandemic, many of the car brands it supplies have ramped up production to keep up with rising demand. For Brink, this means finding new ways to fulfil customer orders, which already see the towbar specialist manufacture north of 160 000 towbars per year for South Africa, the UK, Europe and Thailand.

Brink’s modern towbar manufacturing facility is situated in Pietermaritzburg, and is equipped with a significant number of Yaskawa robotic welding cells. The cell is comprised of two stations where it has two GP25 robots running in synchronised motion with a set of positioners, all housed in a protective enclosure. “For operators, using the system is simple − load the part, press the button, and the doors will close,” explains Devon Prinsloo, national project manager at Yaskawa Southern Africa. “They run the two stations in parallel so that there’s always an active part getting loaded and unloaded. This reduces their cycle time in the long run.”

Since the system’s deployment, Brink has seen a dramatic increase in production, helping it meet demands that were otherwise unattainable before the introduction of automated cells to run the operation. And if car production rates are the benchmark, the towbar leader won’t be slowing down anytime soon. In fact, Brink has recently installed its fifth, and soon its sixth, cell from Yaskawa.

Designing and installing custom solutions for niche manufacturing operations is no easy task, but Yaskawa has a long history of problem-solving and optimising production lines for robotic integration. “Brink uses a water-cooled torch welding system,” says Prinsloo. “The booth itself was designed by one of our suppliers, Dynamik, but for the most part we set up the entire system, including writing the PLC program and robot program.”

In this case, Brink is also well-versed with the robot, so they perform live programming on-site with extensive use of MotoSim. The entire system is controlled using Profinet, Ethernet IP and Profisafe. Profinet is an open industrial ethernet solution based on international standards. It is specifically designed for collecting data from, and controlling equipment in, industrial systems with a particular strength in delivering data under time constraints.

With the re-emergence of high demand in the global economy across different sectors, manufacturers are pushing the boundaries of how automation can add accuracy, efficiency, productivity, and return on investment for their operations by partnering with experts like Yaskawa.

Further reading:

Time-sensitive networking
RJ Connect Editor's Choice Fieldbus & Industrial Networking
In this article, we will explore what is driving the rise of time-sensitive networking, how it is reshaping industrial efficiency, the challenges when deploying this technology, and ways to tackle these challenges.

Read more...

---

Loop Signature 30: Nonlinearity in control loops (Part 1)
Michael Brown Control Engineering Editor's Choice Fieldbus & Industrial Networking
If nonlinearity occurs it means that if one is to carry on controlling with the same response to changes in load or setpoint, then the tuning of the controller will also need to be adjusted to meet the new conditions.

Read more...

---

Precision in paper processing
VEGA Controls SA Editor's Choice Level Measurement & Control
Paper manufacturing is a demanding process that relies on consistency, precision and control at every stage. The VEGABAR 82 pressure transmitter is well-suited to these harsh environments.

Read more...

---

Ensuring clean and safe water
Endress+Hauser South Africa Editor's Choice Analytical Instrumentation & Environmental Monitoring
Endress+Hauser’s comprehensive range of disinfection sensors is designed to monitor and control disinfectant levels in water treatment processes.

Read more...

---

A South African legacy in telemetry
Interlynx-SA Editor's Choice Industrial Wireless
Telemetry is becoming a vital component of industrial strategy, allowing companies to harness real-time data to optimise processes and reduce waste. One company leading this technological shift is Interlynx.

Read more...

---

Case History 199: Another example of the effectiveness of cascade control
Michael Brown Control Engineering Editor's Choice Fieldbus & Industrial Networking
In my last article I wrote about how cascade control systems can effectively overcome valve problems. This article gives another example of how a temperature control was able to perform well, in spite of really severe valve problems.

Read more...

---

Upgrading legacy automation
Omron Electronics Editor's Choice Fieldbus & Industrial Networking
Legacy automation is characterised by technology in the later stages of its useful life. As new automation technologies continue to emerge and interconnect at an exponential rate, failing to integrate these technologies can widen the gap between the competitive and the obsolete.

Read more...

---

Planetary gear units for high torque requirements
SEW-EURODRIVE Editor's Choice Motion Control & Drives
Packing a compact design, along with high torque and low-speed outputs, the new SEW PPK and SEW P2.e planetary gear units from SEW-EURODRIVE offer new capabilities in continuous heavy-duty applications where space is at a premium.

Read more...

---

These robots crawl into every nook and cranny
DNH Tradeserve t/a DNH Technologies Editor's Choice Motion Control & Drives
Inuktun's small crawler robot magnetically sticks to metal walls and is able to move in all directions. It carries cameras, sensors and tools for inspection or maintenance work in tight pipes and on the outer hulls of tanks or ships. All crawler modules and cameras are equipped with brushed DC motors from Swiss drive specialist, maxon using various motor-gearhead combinations.

Read more...

---

Swiss watchmaking meets hypercar power
Horne Technologies Editor's Choice
The display of Bugatti’s upcoming luxury model, Tourbillon will be something truly special. Instead of a digital version, the driver will see a genuine Swiss timepiece behind the steering wheel.

Read more...

---