Whether for gases or liquids, Kobold’s KDS flowmeter performs process monitoring and control tasks reliably. Via a magnetic tracking system, the float position is transmitted to a corresponding pointer and optionally to an analog output.
The fluid flows from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the measuring cone and the float is produced, which corresponds to the flow. The forces acting on the float are in equilibrium. The height of the float resulting from the flow rate is transmitted by the permanent magnet in the float, through the magnetic tracking system in a rotation to the pointer axis of the analog indicator unit.
The variable-area flowmeter comprises a stainless steel device with an integrated, conical stainless steel measuring tube and a vertically movable float. The KDS-K/C model has a built-in valve for setting the flow rate.
The robust Kobold KDS flowmeter, with its low wear rate, is widely used in the chemical industry as well as in medical and laboratory engineering. It is used for measuring mass and volume flow rates or for dosing applications, and is available with additional electrical equipment for process monitoring and control. The KDS meter is also suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit of time.
Characteristics include:
• Measuring range for water: 0,1-1 l/h to 20-200 l/h.
• Measuring range for air: 3-30 Nl/h to 600-6000 Nl/h.
• Accuracy: +3,0% of full scale.
• Pressure maximum: 420 bar, temperature maximum: 130°C.
• Optional analog output contacts, flow controller, high-pressure application.
• Horizontal and vertical connections and wall mounting variations are available.
Ultra-compact mass flow meters with advanced transmitters Emerson Automation Solutions
Flow Measurement & Control
Emerson has introduced the Micro Motion G-Series line of Coriolis mass flow and density meters, the most compact dual-tube Coriolis mass flow meters on the market. They offer the same level of quality and reliability as standard designs, but in a much smaller and lighter form factor.
Read more...Pressure sensors for hydrogen applications Instrotech
Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.
Read more...Optimisation of alkaline electrolysers Samson Controls
Flow Measurement & Control
his application study relates to the use of a smart meter valve in alkaline electrolysers, and is based on proven experience with one of the biggest hydrogen electrolyser producers in the world. The project proves that the smart meter valve’s added functionality creates an ideal setup in alkaline electrolysers for reducing cost and improving functionality and system performance.
Read more...Preventing spills and improving operational efficiency
Flow Measurement & Control
In an industry where every spill carries a hefty price tag, Point Energy Partners found that the manual and low-tech systems at their saltwater disposal sites were a significant problem.
Read more...Wind turbines with smart sensors Instrotech
Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...
Read more...Infrared camera for condition monitoring and early fire detection Instrotech
Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.
Read more...Accurate flowmeter for oil & gas Endress+Hauser South Africa
Flow Measurement & Control
Promass Q, the high-tech Coriolis flowmeter from Endress+Hauser, is now also available for larger pipe sizes with maximum flow rates between 850 and 2400 tph.
Read more...Pressure monitoring for oil and water tempering machines Instrotech
Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.
Read more...Optimising CIP processes with precision instrumentation Endress+Hauser South Africa
Flow Measurement & Control
Many food and beverage manufacturers encounter challenges with CIP processes that take too long. Have you considered exploring potential solutions to address these issues?
printer friendly version