Valves, Actuators & Pump Control


New positioner for modern plant automation

August 2022 Valves, Actuators & Pump Control

With the smart app operating concept, simple commissioning and extensive, individual configuration options, the new development from the valve specialist GEMÜ provides users with optimal support in control processes in automated plants. The new GEMÜ 1441 cPos-X electro-pneumatic positioner is suitable for a multitude of control applications with widely varied tasks.

With the 1441 cPos-X, GEMÜ is expanding its range of positioners and process controllers by adding a controller with two-wire technology for the first time. Above all, this offers advantages when it comes to simplified wiring. The field device is supplied via the signal source and thus requires no further power supply. With this new positioner, a passive analog 4-20 mA feedback signal, and digital input and output signals, are available.

The device is suitable for both single-acting and double-acting pneumatic process valves with linear and quarter-turn actuators. The integrated linear travel sensor has a length of 75 mm. Alternatively, an external mounting is available. The electrical connection can be made via M12 connectors or via cable entries with an inside terminal strip.

The new positioner operates using a specially developed app. This is connected to the device via Bluetooth Low Energy. Following self-commissioning with the tried-and-tested SpeedAP function, the basic configuration of the controller can be individually and conveniently adapted to the specific control task. In addition, the device status and error messages can be displayed in plain text, which significantly simplifies error diagnostics. A status display that is also integrated into the positioner displays the most important information about the operating behaviour. The app is available free of charge for both iOS and Android operating systems from the respective app stores.

The integrated actuator module for dosing the control air permits the precise positioning of the desired valve position. At the same time, the control air consumption when idle equals almost zero. The GEMÜ 1441 cPos-X positioner consequently satisfies ecological requirements just as it satisfies control-specific requirements.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

ENERGYValves expands operations
Valves, Actuators & Pump Control
ENERGYValves is expanding its operations with a new facility in Cape Town. The new premises will significantly enhance the company’s capacity to serve the Cape Town market and surrounding areas.

Read more...
Pumps lead the way with advanced technology
Valves, Actuators & Pump Control
The KSB GIW MDX pump has consistently represented a major leap forward in mill duty applications, with KSB relying on customer feedback to improving the design continuously.

Read more...
Wireless leak detection valve
Valves, Actuators & Pump Control
Designed to prevent water leakage by automatically shutting off the water supply when a leak is detected, the Runxin F104 wireless leak detection valve is one of the latest offerings from Allmech.

Read more...
Ball valves and actuators optimise HVAC performance
Schneider Electric South Africa Valves, Actuators & Pump Control
Schneider Electric offers the full range of innovative SpaceLogic and EasyLogic ball valves and actuators. These cutting-edge products are designed to optimise HVAC system performance, ensuring comfort and energy efficiency in commercial and residential buildings.

Read more...
Alfa Laval expands hygienic valve portfolio
Valves, Actuators & Pump Control
Alfa Laval is expanding its hygienic valve portfolio by introducing the Unique SSV pressure relief valve and the Leakage Detection butterfly valve, alongside new smaller sizes of the Unique Mixproof CIP and Unique Mixproof process valves.

Read more...
Preparing pump systems for adverse weather conditions
Valves, Actuators & Pump Control
As the severity of storms in South Africa increases, so has the rush of sediment-laden water become a major issue and a significant challenge for irrigation. When sediment levels rise to just 10 grams per litre or more, the risk of pump wear and dam silting increases dramatically.

Read more...
High-flow solenoid valve
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has introduced the new ASCO Series 327C solenoid valve, which features a direct-acting, high-flow design that provides superior flow-to-power ratio. It permits high flows at minimum power levels, making it ideal for use in power plants, refineries, and chemical processing facilities.

Read more...
Proportional cartridge valve series is the fastest in its class
Valves, Actuators & Pump Control
Parker Hannifin is introducing the enhanced version of the proportional cartridge throttle valve series, TFP. The new pilot valve further reduces the step response times by up to 30%, making the TFP the fastest valve in its class.

Read more...
Proportional cartridge valve series is the fastest in its class
Valves, Actuators & Pump Control
Parker Hannifin is introducing the enhanced version of the proportional cartridge throttle valve series, TFP. The new pilot valve further reduces the step response times by up to 30%, making the TFP the fastest valve in its class.

Read more...
Inspection system for leak detection in valves in hazardous areas
Extech Safety Systems Valves, Actuators & Pump Control
Leaking valves in industrial plants not only lead to loss, safety risks and possible contamination and pollution, but also result in high economic costs. Therefore, valves in hazardous areas require regular proper inspection and preventive maintenance to ensure their functionality.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved