Flow Measurement & Control


Hygienic flow monitor

May 2000 Flow Measurement & Control

IFM Electronic has introduced the SCG hygienic flow monitor for use in the food, brewing and medical industries. Of particular interest is that the hygienic seal is already welded onto the flow monitor making the unit easy to install.

The stainless steel monitor has a 30 mm/s to 3 m/s range with a 3 000 kPa pressure rating. It operates in a temperature medium from -25 to +95°C and meets IP67 requirements.

The SCG has a 20–36 V d.c. operating voltage, a 400 mA load current and a 1–10 s response time.

IFM Electronic is represented locally by Shorrock Senior Associates.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Pulse totaliser counter
Instrotech Flow Measurement & Control
The electronic unit shows flow rate, resettable daily and total counter (mass units can also be set), and all customised program settings remain saved, even after a battery exchange.

Read more...
Permanently precise flow measurement
Morton Controls Flow Measurement & Control
Proven and tested in practice, the small size of the FMQ’s measuring body and electronics enable simple, vibration-insensitive integration into almost all applications.

Read more...
Mass flow controllers and meters
Electrocomp Flow Measurement & Control
Unlike most other devices on the market, these devices do not suffer from drift and do not require in-service recalibration.

Read more...
Magnetic-inductive flow meter for phosphate precipitation
Instrotech Flow Measurement & Control
With a 4-20 mA signal or optional pulse output, the MIK allows for immediate response to the latest process conditions.

Read more...
Inline process viscometer for polymer and oil monitoring
SECO Process Instrumentation Flow Measurement & Control
This hermetically sealed unit is assembled entirely from 316L stainless steel and includes built-in fluid temperature measurement.

Read more...
Wall-mount ultrasonic flow meters
Royce Water Systems Flow Measurement & Control
High measurement accuracy and minimal interference due to its advanced error correction technology are among the flow meter’s benefits.

Read more...
Flow meters and switches for very slow flows
Instrotech Flow Measurement & Control
Kobold’s KSV meters are shock resistant, small, lightweight and simple to install for measuring liquid or air flow with full-scale accuracy within +/-6%.

Read more...
Indian airport’s fuel station retrofitted with Rotork actuators
Flow Measurement & Control
A reduction of downtime was of critical concern to the customer, which can be assisted by an holistic asset management programme such as Lifetime Management.

Read more...
Flow control for wastewater treatment
Flow Measurement & Control
Going beyond simple open/close functions, the Rotork actuators can move the valves and gates to exact positions to provide complete control of flow in the process.

Read more...
Flow measurement of abrasive slurries in hydrocyclone feedlines
KROHNE Flow Measurement & Control
Dedicated flowmeters for cyclone classification help miners improve throughput while keeping maintenance costs low.

Read more...