Level Measurement & Control


Level switch is available in EEx and flameproof versions

August 2002 Level Measurement & Control

Solartron Mobrey's short fork level sensor Squing 2 is now available in two new versions for use in hazardous areas. The explosion proof version is approved to ATEX II 1/2 G D and EEx d IIC T6. The IS version has the ATEX II 1 G D and EEx ia IIC T5 approvals. Both are ideal for use in a wide range of process, chemical and petrochemical applications.

Squing 2 is a compact, robust vibrating fork level switch. The fork assembly extends just 50 mm into the process pipe or tank, making it easy to install in a wide range of installations. The unit features a visible heartbeat LED that flashes continuously to give visual confirmation that the sensor is operational. Warning of any fault with the sensor is indicated by a change in the flash-rate. Nuisance tripping of the switch is avoided by use of the built-in user-selectable time delay function, which allows reaction time to be set within a range from 0,33 to 30 s, according to the application.

The new explosion proof and IS versions of Squing 2 are available with wet-sides in a variety of materials including 316L stainless steel and Halar/PFA copolymer coating for wide chemical compatibility.

For more information: Dave Rosser, DLM, 011 457 0500, [email protected], www.dlm.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cloud-based inventory management software
Endress+Hauser South Africa Level Measurement & Control
Netilion is an award-winning cloud-based IIoT ecosystem designed for industrial processes. It connects the physical and digital worlds to send valuable information from the field straight to your phone, tablet or other device.

Read more...
Level sensing, conveyor control and grid resistors
DRH Components Editor's Choice Level Measurement & Control
DRH Components is a specialist electric component and systems supplier with a focus on the control of electric motors. As part of its wide variety of products, the company markets the entire Bindicator range. Bindicator manufactures sensors for dry bulk and liquid level measurement.

Read more...
Level measurement under extreme plant processing conditions
VEGA Controls SA Level Measurement & Control
Level measurement in LNG and LPG processes is about answering the simple question: “How much product is in the tank?” However, obtaining an exact value is not easy. The products are often under pressure, cryogenic, and highly explosive. Sensors from Vega have been operating successfully in all stages of the LNG/LPG process for many years.

Read more...
Grounding of hydrostatic level sensors
WIKA Instruments Level Measurement & Control
Hydrostatic level sensors are very often installed in outdoor applications, primarily in the water and wastewater industries. A good connection to ground is essential when installing hydrostatic level sensors, since no grounding or poor grounding can result in destruction or damage to the level sensor.

Read more...
VEGA expands radar portfolio for factory automation
VEGA Controls SA Editor's Choice Level Measurement & Control
VEGA is known worldwide for ensuring safe and stable processes with its level and pressure sensors, even under the most difficult conditions. The world market leader is now putting the finishing touches to its radar level portfolio, especially to meet the demands of fast processes in factory automation.

Read more...
Factory automation made easy
VEGA Controls SA Level Measurement & Control
With the introduction of VEGAPULS 42, instrumentation specialist, VEGA is bringing its extensive experience with radar measurement technology to factory automation.

Read more...
The ultimate outdoor sensing solution
Turck Banner Southern Africa Level Measurement & Control
Turck Banner’s T30R series has been expanded with a new long-range model. This sensor can accurately recognise and measure targets up to 25 m away, which is a 10 m increase over previous models.

Read more...
Non-nuclear density measurement
Morton Controls Level Measurement & Control
Red Meters are changing the way industry measures density of slurries and dry bulk with its range of non-nuclear meters. Measurement data is shown in real time. Combined with software called Ruby, the ...

Read more...
Accurate measurement of moisture
Morton Controls Level Measurement & Control
Harrer & Kassen GmbH is an expert in the field of microwave and NIR measuring techniques. HK provides the development and manufacturing of progressive, reliable and advanced instruments for moisture ...

Read more...
Suspended solids and turbidity measurement
Level Measurement & Control
Quadbeam sensors provide a continuous and accurate measurement of suspended solids and turbidity. The sensor uses a four-beam measurement principle that self-compensates for common measurement errors ...

Read more...