Electrical Power & Protection


Protecting data centres from lightning and surges

October 2018 Electrical Power & Protection

Data centres rely on the optimal performance of equipment, so unwanted surges on the power supply lines can cripple operations. In fact, these energy spikes can cost significant amounts of money in recovery time and hardware damage. Across the continent, DEHN Africa’s expertise provides surge protection for data centres against various potential causes.

Julienne Puttkammer, one of the technical team at DEHN Africa, says, “There are two main types of risk when it comes to data centres and electrical power surges. “These lightning strikes, both direct and indirect; and switching surges, which can be internal, potentially caused by the switching of a cooling system’s inductive load or possibly generator switch-over, or external, coming from the utility itself.

“In Africa, the foremost causes of surges to data centre systems largely depend on the area. For example, in regions with a stable supply, power surges are most commonly caused by lightning strikes, while in areas of unstable supply, the most frequent cause is on/off switching. Even a nearby lightning strike, and not necessarily a direct hit, can cause a surge to flow on conductors and electrical lines. So, the factors to look at are whether the facility is in a lightning-prone area, and the stability of the grid.”

He adds that because the consequences of a direct lightning strike can be catastrophic, it is common for data centre designers to opt for lightning protection installation, regardless of whether normal risk procedure requires it: “Data centres contain sensitive equipment, for which all kinds of backup power must be implemented to eliminate downtime.”

The main challenge in implementing surge protection measures involves coordinating all the aspects from the beginning of the project. “Ideally, the most comprehensive solution would include all the interlinking systems of lightning and surge protection from the design stage,” elaborates Puttkammer. “We need to think about issues such as cable routing or embedding bonding conductors in concrete. This needs to be well coordinated through the planning and construction phases.

“To come in once a rollout has been completed, or is already underway, means that you need to find the space to install and implement surge protection systems, which then requires some sort of compromise in many cases. And while it is not impossible to have a good system afterwards, retrofitting is not ideal. At DEHN Africa we are, however, seeing an encouraging move towards including lightning and surge protection for data centres from the beginning of a project.”

With regards to DEHN’s products and solutions for data centre surge protection, Puttkammer reiterates that it all starts with a planning phase: “We offer all the services required. A risk assessment, soil testing if necessary, a detailed design, an earth electrode design for AC system faults, and an inspection and sign-off on a lightning safety report. Thereafter we offer all the necessary tested products as well, including the lightning protection, earthing and bonding components, as well as the electrical and electronic surge protection devices.”

Data centres in Africa face some unique challenges in terms of surge protection. “We see some of the highest lightning flash density in central Africa, and some of the data centres we’ve worked on are very close to these high density areas,” concluded Puttkammer. “DEHN is seen as a lightning specialist and so we start with the lightning protection side, but as it is all one solution, we bring in the surge risk management side as well. There are places on the continent where we need to safeguard against on and off switching on the grid itself. When it comes to grid reliability, we should note that South Africa, by and large, measures up very well when we do not have to deal with load shedding issues.”

For more information contact Hans Oelofse, DEHN Africa, +27 11 704 1487, [email protected], www.dehn-africa.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Grid to backup power in zero seconds
Electrical Power & Protection
South Ocean Electric Wire has completed a solar installation that marks a global first: a seamless switch from grid to backup power in zero seconds.

Read more...
Three decarbonisation myths and how organisations can debunk them
Schneider Electric South Africa Electrical Power & Protection
A UN Climate Change Report revealed that the world is on track to miss its 2050 net zero targets, with temperatures expected to increase by over 2,4°C by 2100. To help shift positive intent to concrete action, Schneider Electric outlined three of the most common myths surrounding decarbonisation and how organisations can get started on their decarbonisation journey.

Read more...
Tackling the barriers of renewables and empowering the manufacturing sector
Electrical Power & Protection
Solar energy is surging in South Africa, but the energy is primarily self-consumed, meaning many manufacturing sites draw power directly and don’t gain more energy independence through comprehensive energy storage or hybrid energy solutions.

Read more...
Three-phase filters for electromagnetic interference
Vepac Electronics Electrical Power & Protection
Vepac Electronics has available three-phase filters that provide a solution to electromagnetic interference generated by equipment or from an AC source.

Read more...
The age of grid defection is upon us
Electrical Power & Protection
Solar and battery systems have got so cheap that many private individuals, farmers and companies are waking up to the fact that in many locations in South Africa it is now less expensive to be off the electrical grid than to be on it.

Read more...
Measure the electrical performance of your machinery
Vepac Electronics Electrical Power & Protection
The TELE eCap from Vepac Electronics allows you to use energy wisely and reduce operational expenses.

Read more...
Connectors for quick, easy and tool-free in-field termination
Electrical Power & Protection
KYOCERA AVX has released the new 9288-000 Series hermaphroditic wire-to-wire and wire-to-board connectors for lighting and industrial applications. These unique two-piece connectors facilitate WTW termination with two identical mating halves, which simplifies BOMs.

Read more...
Biomass is building up steam
Electrical Power & Protection
Pressure is mounting for local manufacturers to swap fossil fuels for biomass to reduce their carbon footprints and mitigate carbon taxes. Experienced steam and boiler operations and maintenance service provider, Associated Energy Services has spent the past 14 years reviewing solutions.

Read more...
Würth Elektronik expands its power module series
Electrical Power & Protection
Würth Elektronik has expanded its successful MagI³C-VDLM power module series with two new models that further enhance the performance of the existing portfolio of compact DC/DC power supply modules.

Read more...
The journey towards renewable energy in the Seychelles
Electrical Power & Protection
The Seychelles is committed to its ambitious goal of achieving net-zero carbon emissions by 2050. Recent technological advancements and strategic planning are steadily paving the way for a more sustainable future.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved