IT in Manufacturing


Is industrial IT the next wave for Africa?

May 2018 IT in Manufacturing

Infrastructure projects, manufacturing and energy and resource companies may be facing some headwinds, but they are undeniably driving GDP growth and, as a result, are in the midst of a technological renaissance that is transforming their look, systems and processes. And it is a transformation that they cannot afford to ignore.

ICT as an enabler

Much has already been debated around the fact that the African economy can, and is, growing significantly as a result of ICT-enabled solutions – especially if these solutions are based in a platform of empowerment that provides access to education and job opportunities. The industrial sector is no different. IT solutions have become an enabler to mobilisation, automation and improving decision making.

Traditional views on technology have evolved over the past several years, thanks in part to its consumerisation. Increasingly, technology delivers on more than just products. Instead, it is focused towards offering solutions that span the corporate and consumer spheres. Phrases like the sharing economy, digitalisation, and collaboration, are driving us towards a new era of digital possible, which is especially true in the industrial space.

Take the mining sector for example, where East Africa has several mineral belts. Establishing visibility over far-flung global operations is critical and, while the long-term outlook is strong, the connected mine with integrated data flows is fundamental if miners are to meet the numerous short and medium-term challenges now facing the industry.

The infrastructure and cloud play

This, however, is easier said than done. Connectivity is a constant challenge for mine operators and as automation, process optimisation and integration with the IoT becomes critical for operational efficiency, an industrial IT centre with a solid IT infrastructure is required to support the amount of data generated. Just look at wearables. They are not just a fitness step-counter – apply them in the mining space and you have a device that interacts with you, showing your heart rate, elevated stress levels and even the gases you are exposed to. It’s about a connected workforce, but more importantly, information that can be used to drive safety, learning and operational effectiveness.

This data, however, needs to be stored somewhere and this is where the cloud comes in. For these industries, there are two cloud plays that can be considered. Firstly, with connectivity and IoT to really drive a competitive advantage, this information needs to be stored for analysis. The cloud is a perfect place for this and access is immediate for the analysis of trend leading indications and cross operational learning. Secondly, all non-mission critical applications can be strategically migrated to the cloud for consolidation and to reduce costs. Applied correctly, business will be able to obtain real insight and have the opportunity to understand its incremental cost of operations – and hence, the incremental value – at any given moment.

Convergence of IT and OT

So then, at a time of rapid change, this sector quickly needs to examine which technology investments will have the biggest positive impact on their businesses. And what is the value potential and return on investment of these new technologies? Furthermore, businesses need to start to look at how the convergence of IT and OT makes tech more relevant in the industrial space.

Industrialisation on the continent will be driven by three mega trends – natural resources, people, and infrastructure development. These industries are asset intensive and they need to be managed and driven effectively if we are to continue seeing growth across the continent. We need to bring all three media trends together, making them perfect candidates for industrial IT, which is driven by solid network infrastructure, connectivity, cloud, security and a partner that understands how these can make or break you.

For more information contact Caitlin Hawken, Orangeink, +27 (0)11 465 4075, [email protected], www.orangeink.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Unlocking mining efficiency with advanced processing control
IT in Manufacturing
ABB’s Advanced Process Control system, powered by its Expert Optimizer platform, is emerging as a key enabler of smarter, more efficient mining operations.

Read more...
Open control technology reduces energy consumption and carbon footprint.
Beckhoff Automation IT in Manufacturing
The Swedish company Airwatergreen AB is breaking new ground in the dehumidification of air in industrial buildings and warehouses. PC-based control from Beckhoff regulates the innovative process.

Read more...
Harnessing AI and satellite imagery to estimate water levels in dams
IT in Manufacturing
Farmers and water managers often struggle to accurately estimate and monitor the available water in dams. To address the challenge, International Water Management Institute researchers have worked with Digital Earth Africa to create an innovation that uses satellite images and AI to get timely and accurate dam volume measurements.

Read more...
Why industry should enter the world of operator training simulators
Schneider Electric South Africa IT in Manufacturing
System-agnostic operator training simulator (OTS) software is a somewhat unsung hero of industry that trains plant operators in a virtual world that mirrors real-world operations. The benefits are multiple.

Read more...
Track busway for scalable data centre power delivery
IT in Manufacturing
The latest generation Legrand Data Centre Track Busway technology addresses the operational pressures facing today’s high-density, AI-intensive computing environments and is being well received by data centre facilities around the world.

Read more...
Poor heat management in data centre design
IT in Manufacturing
Designing a world-class data centre goes beyond simply keeping servers on during load shedding; it is about ensuring they run efficiently, reliably, and within the precise environmental conditions they were built and designed for.

Read more...
It’s time to fight AI with AI in the battle for cyber resilience
IT in Manufacturing
Cybercrime is evolving rapidly, and the nature of cyber threats has shifted dramatically. Attacks are now increasingly powered by AI, accelerating their speed, scale and sophistication. Cybersecurity needs to become part of business-critical strategy, powered by AI to match attackers’ speed with smarter, faster and more adaptive defences.

Read more...
Why AI sustainability must be a boardroom priority
IT in Manufacturing
As South African companies race to harness artificial intelligence for innovation and growth, few are asking the most critical question - the environmental cost.

Read more...
RS South Africa shines spotlight on MRO procurement
RS South Africa IT in Manufacturing
RS South Africa has highlighted the growing pressures faced by procurement professionals responsible for maintenance, repair and operations supplies across the country’s vital economic sectors.

Read more...
Sustainable energy management
Siemens South Africa IT in Manufacturing
Utilising its innovative ONE approach technology, Siemens provides complete transparency on resource consumption and offers data-driven optimisation recommendations for sustainable energy management.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved