Whatever the industry sector, temperature monitoring is a necessary consideration to ensure operations run smoothly. There are a number of ways to monitor temperature, but choosing the correct technology for the application can make a significant difference. For instance, Omniflex’s Maxiflex Telemetry and Data Acquisition system is a good choice for high density temperature monitoring applications. With its fully inter-channel isolated thermocouple and RTD input modules, and the ability to integrate into DCS, scad and alarm/trip systems, it can provide significant advantages and costs savings over PLC and hockey puck solutions.
Benefits of the Maxiflex RTD module:
• Supports Pt100 and Ni20 STD.
• High Inter-channel galvanic isolation (500 VAC).
• 4 set points per channel.
• Rate of change alarms.
• Converts RTD to degrees Celsius/Fahrenheit at a resolution of 0,1°.
Benefits of the Maxiflex T/C (thermocouple) module:
• 8 T/C channels per module.
• Supports type E, J, K, T, N, B, R, S thermocouples.
• High inter-channel galvanic isolation (500 VAC).
• 4 set points per channel.
• Rate of change alarms.
• Input range and T/C type can be configured differently for each channel.
Unlocking ICCP remote monitoring Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.
Read more...Mine-wide water monitoring at Nkomati Nickel plant Omniflex Remote Monitoring Specialists
Data Acquisition & Telemetry
Omniflex is supplying a new wireless telemetry system for Nkomati Nickel plant, restoring mine-wide monitoring of water and pumping systems across six outstations as the operation prepares to resume following a R753 million restart investment.
Read more...Omniflex delivers ICCP systems in London Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied impressed current cathodic protection systems for landmark London buildings, protecting reinforced concrete from corrosion and extending the service life of commercial, retail and heritage sites.
Read more...One sensor, three switchable output modes with IO-Link
Temperature Measurement
Siemens’ new Sitrans TS200 IO-Link temperature sensor is available in three sizes, and offers three switchable output modes in one device with remote firmware update capability and an integrated LED for quick status checks.
Read more...Modernising acid cooler protection without disrupting production Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied an advanced anodic protection control system to phosphate producer Foskor, replacing a legacy transformer rectifier system while maintaining uninterrupted production. The distributed PowerView CP solution provides remote monitoring and DCS integration.
Read more...SCE appointed authorised Vaisala distributor for South Africa
Temperature Measurement
SCE has been appointed the authorised Vaisala distributor for South Africa, giving local engineers direct access to world-class humidity, temperature and CO2 measurement technology backed by full in-country calibration and technical support.
Read more...Upgrading alarm systems for critical industries Omniflex Remote Monitoring Specialists
PLCs, DCSs & Controllers
Omniflex’s OMNI16R alarm annunciator platform provides a direct replacement for legacy CSA systems such as MPAS 90 and SA9100, enabling operators in oil and gas, nuclear and power generation to modernise alarm infrastructure without sacrificing the clarity required for safe operations.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
Read more...Thermal imaging camera with high thermal resolution Vepac Electronics
Temperature Measurement Maintenance, Test & Measurement, Calibration
Vepac Electronics introduces a compact thermal imaging camera that helps technicians spot temperature problems before they become costly failures.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex explains how integrating remote monitoring and cloud-based platforms into cathodic and anodic protection systems is helping process plant operators stay ahead of corrosion and make smarter maintenance decisions.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version