Kobold has introduced a newly-developed electromagnetic inductive flowmeter for conductive fluids – the model DMH with a standard accuracy of 0,3% of reading. It is used specifically for the measurement and monitoring of the volume flow rate of acid or alkaline fluids, potable (drinking) water, wastewater, pulps, pastes and other electrically conductive materials, without loss of pressure.
When an electrically conductive medium passes through a directional magnetic field, a voltage is induced in accordance with Faraday’s Law of Induction. The size of this measurement voltage is proportional to the mean rate of flow and consequently also to the volume flow rate.
A flowmeter consists of a sensor that picks up the measuring signal generated from the induced voltage, and a transducer that converts this signal into a standardised output signal (4-20 mA or pulses). The measurement transducer can be affixed to the sensor or mounted separately. Pressure, temperature, density and viscosity do not affect the volume measurement. Solid fractions and gas bubbles should be avoided.
The microprocessor-controlled converter UMF2 guarantees the highest of accuracies and with its alpha-numeric backlit LCD terminal, six keys, plain text response, and plausibility check of entries, is easy to operate.
Empty-pipe detection, coil current monitoring, and plain text error messages guarantee full control over sensor and measuring point at any time. Pulse, status, and current outputs as well as HART communication are standard features, all of them electrically isolated. Lining materials such as hard rubber, soft rubber, PTFE or PFA are available.
A wide range of standard and special electrode materials are on offer, including Hastelloy, platinum, and tantalum. The DMH is available for nominal width of DN10 ... DN1200 and flow velocities up to 10 m/s.
Ultra-compact mass flow meters with advanced transmitters Emerson Automation Solutions
Flow Measurement & Control
Emerson has introduced the Micro Motion G-Series line of Coriolis mass flow and density meters, the most compact dual-tube Coriolis mass flow meters on the market. They offer the same level of quality and reliability as standard designs, but in a much smaller and lighter form factor.
Read more...Pressure sensors for hydrogen applications Instrotech
Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.
Read more...Optimisation of alkaline electrolysers Samson Controls
Flow Measurement & Control
his application study relates to the use of a smart meter valve in alkaline electrolysers, and is based on proven experience with one of the biggest hydrogen electrolyser producers in the world. The project proves that the smart meter valve’s added functionality creates an ideal setup in alkaline electrolysers for reducing cost and improving functionality and system performance.
Read more...Preventing spills and improving operational efficiency
Flow Measurement & Control
In an industry where every spill carries a hefty price tag, Point Energy Partners found that the manual and low-tech systems at their saltwater disposal sites were a significant problem.
Read more...Wind turbines with smart sensors Instrotech
Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...
Read more...Infrared camera for condition monitoring and early fire detection Instrotech
Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.
Read more...Accurate flowmeter for oil & gas Endress+Hauser South Africa
Flow Measurement & Control
Promass Q, the high-tech Coriolis flowmeter from Endress+Hauser, is now also available for larger pipe sizes with maximum flow rates between 850 and 2400 tph.
Read more...Pressure monitoring for oil and water tempering machines Instrotech
Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.
Read more...Optimising CIP processes with precision instrumentation Endress+Hauser South Africa
Flow Measurement & Control
Many food and beverage manufacturers encounter challenges with CIP processes that take too long. Have you considered exploring potential solutions to address these issues?