Instrotech has announced the availability of the Optris CSmicro LT pyrometer, specifically for application in the measurement and control of temperature in cement manufacture.
Temperature is a critically importance component in the process of making of concrete, and specifically, the importance of controlling the temperature before the concrete is poured. Optimal temperature of the concrete must fall within the range of +5°C and +55°C, a factor which greatly influences the final characteristics and performance (cracking, resistance and wear and tear). Concrete temperature is directly related to the development of strength and fresh concrete can be damaged when exposed to very low or very high temperatures.
Key factors to control during the pouring of concrete related to temperature:
* Warm weather affects speed limits evaporation.
* Cold weather inhibits the hydration process.
Optris’ CSmicro LT is equipped with an innovative, miniaturised stainless steel measuring head optimally suited for installation in limited spaces. Its small size and its temperature resistance up to 120°C make the mechanic integration of the measuring head especially cost-efficient.
The intelligent LED display works optionally as alarm signal, target support, self-diagnosis or temperature-code display. The placement of electronic components within the cable allows for a high temperature resistance of the measuring head. It measures temperature in the range of -40 to 1030°C; the spectral range is 8 to 14 μm and the response time is 30 ms - 999 s. The unit can be optimally installed on cement pumps, mixer trucks and cement silos.
One sensor, three switchable output modes with IO-Link
Temperature Measurement
: Siemens’ new Sitrans TS200 IO-Link temperature sensor is available in three sizes, and offers three switchable output modes in one device with remote firmware update capability and an integrated LED for quick status checks.
Read more...SCE appointed authorised Vaisala distributor for South Africa
Temperature Measurement
SCE has been appointed the authorised Vaisala distributor for South Africa, giving local engineers direct access to world-class humidity, temperature and CO2 measurement technology backed by full in-country calibration and technical support.
Read more...Thermal imaging camera with high thermal resolution Vepac Electronics
Temperature Measurement Maintenance, Test & Measurement, Calibration
Vepac Electronics introduces a compact thermal imaging camera that helps technicians spot temperature problems before they become costly failures.
Read more...Test bench for temperature calibrating power semiconductors Beckhoff Automation
Temperature Measurement
Precise temperature characteristics are essential for performing power cycling tests on power semiconductors. Infineon Technologies determines these characteristic curves on a test bench using PC-based control. As a result, calibration has become more precise and the efficiency of the entire test laboratory has increased significantly.
Read more...Field calibration made easy Instrotech
Maintenance, Test & Measurement, Calibration
Instrotech’s locally designed and manufactured Calog calibrator range feature a rugged IP54-rated housing, backlit display with data logging via SD card, and a lithium-ion battery with approximately eight hours of run time.
Read more...Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Fire prevention strategies with thermal imaging
Temperature Measurement
Effective fire prevention strategies focus on identifying, reducing and managing fire risks before they become incidents. Through proactive measures, planning and reliable detection technologies, organisations can create safer environments and minimise the likelihood of fire outbreaks.
Read more...High-precision fill quantity control in food supplement production
Temperature Measurement
Vital Products was looking for a precise and efficient solution to check the weight and ensure the completeness of its products. Minebea Intec, a specialist in industrial weighing and inspection technologies, was able to provide a solution.
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Decarbonising a heat and power plant Valmet South Africa
Temperature Measurement
Valmet is delivering a boiler fuel conversion for a combined heat and power plant in Poland. After modernisation, coal will be replaced entirely with certified forest biomass supplied by local providers.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version