Compact temperature head transmitter

Temperature Measurement

June 2001 Temperature Measurement

The new iTEMP TMT 184 Profibus-PA temperature head transmitter from Endress+Hauser is claimed to remain, dimensionally, the smallest device of its kind in the world today.

Profibus-PA improves performance over the traditional 4-20 mA signal transmission due to reduced complexity, more reliable transmission over long distances and significant cabling cost savings. Reduced costs in planning, documentation, installation and commissioning are additional benefits of using Profibus-PA networks.

The transmitter is universally programmable from the control room for a wide range of input signals with the use of Profibus-PA profile V3.0 compatible software. This feature reduces costs associated with spares holding, as the device is freely programmable for a choice of any RTD and TC type, resistance and mV input signals. Profile V3.0 further allows extensive diagnostic information, such as temperature sensor failure.

An intrinsically safe version certified to ATEX, FM and CSA standards, is also available ensuring plant security even in hazardous plant environments. Plant integrity is further ensured by the fact that TMT 184 complies to the NAMUR NE 21 standard for EMV protection, is fully galvanically isolated in excess of 2 kV, maintains accuracy over the complete measuring range and throughout the total ambient temperature range.

The small DIN 43 729 form B size allows TMT 184 to be installed in all standard temperature sensor heads. This includes both the new standard Form B and the larger Form A sensor head format. The reduced size and advances in manufacturing technology have also led to a price reduction of up to 25% compared to previous, similar device types.

Difficult environmental conditions are no challenge for the rugged TMT 184. The device is fully potted and therefore has been installed, without influence on the temperature signal, in areas where condensate frequently occurs. Secure terminal screws are mechanically 'locked' and cannot fall out during cable connection. Reverse polarity protection ensures that there is no electronic damage if incorrectly connected.

Endress+Hauser

(011) 262 8000

[email protected]

www.za.endress.com

Share this article:

How wet steam undermines boiler efficiency
Endress+Hauser South Africa Temperature Measurement
Endress+Hauser understands the daily challenges and demands placed on energy and utility managers across the spectrum of steam generation, distribution and consumption activities. Its global team is committed to working with its partners to overcome these complexities, and particularly those that aim for a safe, economic and sustainable sitsce of steam energy production and delivery.

Read more...

Dramatically reducing greenhouse emissions
Temperature Measurement
Online teaser: There is considerable potential for reducing CO₂ emissions in the mill process by optimising the heat source for drying. The most promising approach to achieving a carbon neutral process in a hot gas generator is the combustion of green hydrogen.

Read more...

Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...

Paint curing applications in the automotive industry
R&C Instrumentation Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.

Read more...

Universal temperature transmitter with drift detection
WIKA Instruments Temperature Measurement
The new model T38 digital temperature transmitter from WIKA enables extremely flexible and stable temperature measurement. The instrument offers a maximum of sensor connection combinations, and a new type of drift detection.

Read more...

Temperature monitoring in the metal casting process
Instrotech Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.

Read more...

Pyrometer range with enhanced features
Temperature Measurement
AMETEK Land has relaunched its market-leading SPOT pyrometer range with enhanced features and benefits for a wide range of industrial applications. The new SPOT+ family offers a wide range of temperature measurement from 50 to 3500°C, and a choice of different wavelengths for applications including metals, glass, cement and lime kilns, and foundries.

Read more...

Temperature Measurement

Compact temperature head transmitter

Further reading:

Published by Technews