Level Measurement & Control


Keller capacitive transmitter series

July 2010 Level Measurement & Control

The Keller series 46X capacitive transmitter for water level measurements combines the ceramic measuring cell for low pressure ranges with the μP-electronics of the digital Keller series 30 pressure transmitters. Measuring in the range from 30–100 mbar, the signal values of the pressure and temperature sensors are determined by polynomial compensation. The values can be shown and stored on a PC and can be reprogrammed. A tube integrated in the cable connects the reference chamber of the sensor to ambient.

The output signal is 4–20 mA or 0–10 VDC and the transmitters operate from 0–80°C with temperature compensation in the range 10–50°C. The housing is stainless steel with a 5 m cable supplied as standard. Intrinsically safe versions are also available for use in explosive areas where categories 1 and 2 are required.

For more information contact Pieter Deysel, Instrotech, +27 (0)11 462 1920, [email protected], www.instrotech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Magnetostrictive level transmitter
WIKA Instruments Level Measurement & Control
WIKA’s new model FLM-Tx-FLEX magnetostrictive level transmitter is used for high-accuracy, continuous level detection of liquids, including those with long insertion lengths.

Read more...
Superhero vision for hazardous waste environmental control
VEGA Controls SA Level Measurement & Control
VEGA understands that in the world of hazardous waste management, ensuring both safety and efficiency is crucial. With the disposal of chemicals requiring conscientious attention to ethical and ecological standards, innovative solutions are mandatory. Among these solutions, non-contact level sensors emerge as a game changer, offering increased safety in environments laden with dangerous substances.

Read more...
OEM high-pressure transducer with maximum long-term stability
Instrotech Pressure Measurement & Control
Instrotech is offering KELLER 10LHP, the flagship OEM pressure transducer in the KELLER product portfolio, which exemplifies the highest standards.

Read more...
Copper mining powered by VEGA
VEGA Controls SA Level Measurement & Control
VEGA sensors are an integral part of the continuous monitoring and control systems across the board in mining and beneficiation processes. The robustness, reliability and precision of VEGA instruments make them a good choice for managing liquid levels and ensuring the smooth operation of the production process.

Read more...
Pressure sensors for hydrogen applications
Instrotech Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.

Read more...
Cloud-based inventory management software
Endress+Hauser South Africa Level Measurement & Control
Netilion is an award-winning cloud-based IIoT ecosystem designed for industrial processes. It connects the physical and digital worlds to send valuable information from the field straight to your phone, tablet or other device.

Read more...
Level sensing, conveyor control and grid resistors
DRH Components Editor's Choice Level Measurement & Control
DRH Components is a specialist electric component and systems supplier with a focus on the control of electric motors. As part of its wide variety of products, the company markets the entire Bindicator range. Bindicator manufactures sensors for dry bulk and liquid level measurement.

Read more...
Wind turbines with smart sensors
Instrotech Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...

Read more...
Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...
Pressure monitoring for oil and water tempering machines
Instrotech Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.

Read more...