Bus terminals record differential and absolute pressures.
The Beckhoff Bus Terminal system is being expanded by the new pressure measuring terminals, KM37xx for recording differential and absolute pressures. In a similar way to electrical signal acquisition, pressure measurement is carried out using a standard Bus Terminal with a width of only 24 mm. The compact housing and simple connection system support a space-saving and rapid installation. Additional measuring instruments are not necessary.
The pressure measuring terminals record direct differential and absolute pressures and change the measured pressure into an electrical signal. This 16-bit value is available to the higher level controller independent of the fieldbus. The pressure measuring terminals have quick release mechanisms for connecting the measuring hoses. In addition to measuring, the Bus Terminals also execute other functions such as temperature compensation and avoidance of long-term drift.
Three different pressure measuring terminals are available:
* KM3701 – The 1-channel differential pressure measuring terminal measures pressure differences up to an ambient pressure of 7000 hPa (7 bar) between points.
* KM3702 – The 2-channel absolute pressure measuring terminal records pressure values between 0 and 7000 hPa (7 bar) at each hose connector.
* KM3712 – The 2-channel absolute pressure measuring terminal records negative pressure values between -1000 hPa (-1 bar) and 0 hPa at each hose connector.
Beckhoff pressure measuring terminals can be used in any situation that requires the measurement and monitoring of differential and dynamic pressures in non-aggressive gases, eg, in pressure tanks, pressurised cabins, pneumatic and suction systems. They measure operating pressures, monitor filters and sieves, check the seal tightness of tanks and assist in position testing of construction elements or monitoring the level of liquids. If flow rates are calculated from the measured pressures, then the KM37xx can also be used for flow measurement. They can therefore be applied in areas such as process engineering, systems engineering, building services as well as heating, ventilating and airconditioning.
PC-based control for a food capsule and pod packaging machine Beckhoff Automation
Editor's Choice
For TME, a machine builder specialising in the packaging of powdered foods, Beckhoff’s PC-based control technology offers unlimited opportunities when it comes to performance and innovative capacity in terms of flexibility, scalability and openness.
Read more...Multi-touch panel generation in a smart design Beckhoff Automation
Operator Interfaces, Switches & Relays
Following over 25 years of successful in-house panel production and 12 years of expertise in multi-touch design, Beckhoff is bringing out a new smart panel design, the Next multi-touch panel generation.
Read more...Next-generation PLC technology with advanced chatbot functionality Beckhoff Automation
IT in Manufacturing
Beckhoff is taking automation technology to the next level with TwinCAT PLC++. Both engineering and runtime are noticeably faster, without compromising on TwinCAT’s signature strengths of seamless integration, compatibility and openness.
Read more...German Chancellor visits Beckhoff at Hannover Messe Beckhoff Automation
News
As part of the traditional Hannover Messe opening tour, Federal Chancellor of Germany, Olaf Scholz visited German company, Beckhoff Automation. Hans Beckhoff, managing director and owner of Beckhoff Automation, presented his company and its comprehensive expertise in the field of software and AI.
Read more...PC-based control for fertiliser Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
On a farm in the USA, valuable ammonia is extracted from slurry and processed into ammonium sulphate. NSI Byosis has transformed this complex process into a flexible modular system. This modular approach requires an automation solution with flexible scalability in both hardware and software, which this Dutch company has found in PC-based control from Beckhoff.
Read more...PC-based automated production system for photo calendars Beckhoff Automation
Fieldbus & Industrial Networking
Producing up to 1800 photo calendars per hour using more than 90 servo axes, Durrer Spezialmaschinen develops a wide variety of special-purpose machines from the design phase to commissioning. A new production system for photo calendars proves the importance of comprehensive motion control expertise, with AM8000 servomotors and AX5000 servo drives from Beckhoff used for over 90 dynamically controlled axes.
Read more...Beckhoff’s TwinCAT Vision functionality extended Beckhoff Automation
Fieldbus & Industrial Networking
The Beckhoff TwinCAT 3 Vision software portfolio offers additional image processing functions and extra options for camera integration.
Read more...TwinCAT Vision functionality extended Beckhoff Automation
IT in Manufacturing
The image processing and camera integration capabilities of Beckhoff’s TwinCAT 3 Vision software have been expanded.
printer friendly version