Turck has added a compact magnetic pick-up to its range of special sensors for pneumatic cylinders. The WIM45-UNTL provides an analog output proportional to the position of the piston between the ends of the cylinder, which allows penetration depths and stroke motion to be detected precisely at any time. This type of detection is useful for a large number of applications such as ultrasonic welding, hot air riveting, bolting, pressing, clamping, cutting and quality control. The new sensor provides an efficient alternative to wear-intensive and mechanically cumbersome solutions based on potentiometers or expensive linear positioning systems.
Packaged in a housing 72 mm in length and 5 mm wide it is one of the most compact sensors of its type available. Two fixing lips enable easy fitment in the cylinder groove, while the fixing screws allow adjustment and ensure secure, vibration free mounting.
12 hall-effect transducers produce the analogue signals for processing with electro-magnetic interference being eliminated through signal comparison and cancellation. The analogue output (0-10 V or 4-20 mA) is linear and independent of the polarity orientation of the magnet in the cylinder. The characteristic curve can thus be changed from 0-10 V to 10-0 V by a simple rotation. In-range functionality detects whether the magnet is within the allowed measuring range, if not, an overshoot signal indicates at which end the range has been exceeded.
A wide range of accessories is available, including devices for:
* Mounting on different cylinder types.
* Fine adjustment of the measuring range.
* Fixing a reproducible measuring range after mounting a sensor.
Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...Monitoring analogue process values ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...Protecting buildings’ embodied carbon with retrofitted systems Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Enhancing gold leaching efficiency Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...Telco Sensors for blocked or empty chute detection
Sensors & Transducers
In most industries there is a problem with photoelectric sensors as highly contaminated environments make it difficult to operate and sense reliably. Telco Sensors overcomes this through its powerful high-performance infrared sensors that ensure penetration of harsh pollution to guarantee reliable detection.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version