ifm electronic has introduced the new TK Series temperature switch for temperature monitoring. The compact TK Series switch and its 316 stainless steel RTD probe measure only 72 mm and are directly mounted into the pipe.
Two mechanical setup dials rotate to quickly establish the set and reset point temperatures. The switch’s high accuracy assures that the set-point does not drift and calibration is not required. Two bright LEDs indicate switching and operating status.
The units are fitted with a locking device to prevent unintentional set-point changes
With no moving parts to stick in the process or break, the TK Series temperature switch maintains high performance and long term stability. Electrical connection is achieved with an industry standard Micro DC connector.
The operating temperature range is -25 to 140deg;C with two models available: PNP, (NO/NC) output with adjustable hysteresis and PNP, (2xNO) output with fixed hysteresis.
ifm’s temperature switch uses a Pt1000 RTD for temperature measurement. The Pt1000 RTD is a platinum resistor that exhibits a resistance of 1000 at 0°C. Platinum is used because of its optimal linearity and stability with temperature. Temperature is sensed by measuring the change in resistance of the RTD. As temperature increases, the resistance of the RTD also increases. The signal from the RTD is evaluated by a microprocessor inside the temperature control monitor. The microprocessor, along with electrical components, is mounted on a flexible, temperature-stable polyamide film. RTDs do not require the cold junction compensation of a thermocouple and are shock and vibration resistant.
For more information contact Celia de Beer, ifm electronic SA, 086 143 6772, www.ifm.com/za
Decarbonising a heat and power plant Valmet South Africa
Temperature Measurement
Valmet is delivering a boiler fuel conversion for a combined heat and power plant in Poland. After modernisation, coal will be replaced entirely with certified forest biomass supplied by local providers.
Read more...High-precision fill quantity control in food supplement production
Temperature Measurement
Vital Products was looking for a precise and efficient solution to check the weight and ensure the completeness of its products. Minebea Intec, a specialist in industrial weighing and inspection technologies, was able to provide a solution.
Read more...Space-saving I/O module for control cabinets ifm - South Africa
Enclosures, Cabling & Connectors
The IO-Link I/O module from ifm simplifies integration of sensors and actuators with conventional wiring in the control cabinet as well as in field applications with low IP protection class requirements.
Read more...Precision sensing for water treatment ifm - South Africa
Sensors & Transducers
ifm electronic has introduced two next-generation sensors designed for South Africa’s bulk and wastewater sector, engineered to withstand harsh environments and deliver long-term reliability.
Read more...Infrared solutions for glass manufacturing challenges
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Machine health monitoring with ifm ifm - South Africa
Editor's Choice IT in Manufacturing
With ifm’s machine health monitoring, early signs of wear can be detected and unexpected failures prevented. Combined with equipment preventive maintenance software, interventions can be scheduled proactively to avoid costly downtime.
Read more...Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...Flow measurement in mobile applications ifm - South Africa
Flow Measurement & Control
The SU Puresonic Mobile ultrasonic sensor from ifm is characterised by its displayless design and high temperature resistance. It is ideal for mobile applications and processes with permanent media temperatures of up to 120°C.
Read more...Robust sensors for pneumatic applications ifm - South Africa
Pneumatics & Hydraulics
The pressure sensors from ifm have a G1/8 process connection, combined with a welded thin-film measuring cell. While offering an unbeatable price/performance ratio, this technology provides for high measuring accuracy in a very compact and robust housing.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version