Spirax Sarco’s CSM-PD pre-heating and degassing unit is designed for use with clean and pure steam generators to pre-heat feed water to 85°C without cold spots or stratification.
The units ensure longer equipment life and reduce operating expenses
The use of a pre-heating and degassing unit for feedwater in clean or pure steam generators solves a number of problems, most notably, reducing the life cycle costs. In these systems chemicals cannot be used for treating or degassing the feedwater and therefore thermo-physical/mechanical systems are used instead. The main reasons for installing a CSM-PD unit as an integral part of a clean or pure steam generation system include:
* Removal of dissolved gases.
* Feedwater pre-heating.
* Feedwater accumulation and storage.
The CSM-PD offers improved pressure and water level stability and reduces the liquid entrainment in the clean steam. It also reduces the effects of thermal shock associated with sudden demands for increased steam output.
Dissolved gases are removed from the feedwater increasing heat transfer efficiency and reducing corrosive effects. This enables the clean steam generator to produce higher quality clean steam and meet the requirements of regulations such as HTM 2031 and EN 285.
Temperature measurement solution for foundry
Temperature Measurement
AMETEK Land, a world-leading manufacturer of infrared pyrometers, scanners and thermal imagers, is helping an Indian foundry to support metal quality and reduce ongoing costs.
Read more...How wet steam undermines boiler efficiency Endress+Hauser South Africa
Temperature Measurement
Endress+Hauser understands the daily challenges and demands placed on energy and utility managers across the spectrum of steam generation, distribution and consumption activities. Its global team is committed to working with its partners to overcome these complexities, and particularly those that aim for a safe, economic and sustainable sitsce of steam energy production and delivery.
Read more...Dramatically reducing greenhouse emissions
Temperature Measurement
Online teaser: There is considerable potential for reducing CO2 emissions in the mill process by optimising the heat source for drying. The most promising approach to achieving a carbon neutral process in a hot gas generator is the combustion of green hydrogen.
Read more...Infrared camera for condition monitoring and early fire detection Instrotech
Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.
Read more...Paint curing applications in the automotive industry R&C Instrumentation
Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.
Read more...Universal temperature transmitter with drift detection WIKA Instruments
Temperature Measurement
The new model T38 digital temperature transmitter from WIKA enables extremely flexible and stable temperature measurement. The instrument offers a maximum of sensor connection combinations, and a new type of drift detection.
Read more...Temperature monitoring in the metal casting process Instrotech
Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.
Read more...Pyrometer range with enhanced features
Temperature Measurement
AMETEK Land has relaunched its market-leading SPOT pyrometer range with enhanced features and benefits for a wide range of industrial applications. The new SPOT+ family offers a wide range of temperature measurement from 50 to 3500°C, and a choice of different wavelengths for applications including metals, glass, cement and lime kilns, and foundries.