One of the problems that control system engineers are often faced with is how to locate a PC display unit where it is required while at the same time locating the system unit in a more convenient or environmentally suitable location. Until recently it has not been practical to separate the display and system unit by more than a few metres. Beckhoff has overcome this limitation with a new member of its 'Economy' family.
The highlight of the CP79xx Control Panel series is the DVI/USB extension connection. This enables display devices to be installed at a distance of up to 50 m from the PC as standard. This series is designed for mounting arm installation and display sizes of 6,5", 12", 15", or 19" TFT are available.
The CP79xx Control Panels can be installed at a distance of up to 50 m from the PC as standard
In order to achieve a distance of 50 m without hubs, the USB signal is converted so that it can be transferred via 50 m CAT5 cables commonly used for Ethernet wiring. The signal is converted back to USB 1.1 in the Control Panel.
In addition to touch screen, membrane keyboard and pushbutton extension, a USB hub in the Control Panel enables connection of two external USB devices such as keyboard, mouse, USB stick or CD/DVD drive. The CU8800 USB to USB Extended converter box requires no auxiliary power supply. It has a USB input and an RJ45 USB Extended output. The box is offered complete with all required cables as a cable set.
PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Editor's Choice Motion Control & Drives
Special machine manufacturer, ruhlamat Huarui Automation Technologies has unveiled the second generation of its mass production line for flexible stators with bar winding (pins). This enables an extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...Hans Beckhoff receives German Mechanical Engineering Award Beckhoff Automation
News
Hans Beckhoff has received the 2025 German Mechanical Engineering Award. This prestigious award honours entrepreneurs who have set standards in machine and system engineering, driven innovation, and taken on social responsibility.
Read more...High power, high voltage reed relay
Operator Interfaces, Switches & Relays
Pickering Electronics has upgraded its Series 68 high voltage reed relays to include a new variant supporting high power switching up to 200 W.
Read more...Intuitive CNC HMIs with simulation functionality Beckhoff Automation
SCADA/HMI
The TwinCAT 3 automation software from Beckhoff offers two new function libraries for CNC-specific user interfaces. These were used to create an advanced, intuitive HMI application specifically for CNC purposes and to simulate part machining using real-time data.
Read more...PC-based control technology in additive manufacturing Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
As an open control platform, PC-based control supports different engineering approaches, including low-code programming. The machine builder, Additive Industries uses this to create the code for the TwinCAT runtime of its 3D printers.
Read more...Rugged PoE switch built for industrial demands Conical Technologies
Operator Interfaces, Switches & Relays
The Planet IGS-5225-8P4S-12V switch delivers all of this in a compact, rugged and highly efficient design, making it the switch of choice for engineers working in harsh environments.
Read more...Integrating fire alarm systems into building management systems Beckhoff Automation
Fieldbus & Industrial Networking
Fire alarm systems work independently of the building automation system. Schrack Seconet has developed a flexible gateway using ultra-compact industrial PCs and TwinCAT from Beckhoff, which can be used to flexibly convert a customer-specific communication protocol to a wide range of transmission standards.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version