Turck is offering a new line of programmable pressure sensors that are available with a variety of options suitable for virtually any pressure analysis application. The robust devices operate on the piezoresistive principle, and have no moving mechanical parts to wear out. Capable of measuring in either bar or psi units, the new sensors are suitable for monitoring pressure in applications such as automotive welding, hydraulic clamping systems, machine coolant, pump run dry, vacuum for pick-and-place systems, and other precision pressure analysis applications.
The new sensors are easy to set up. Programming is achieved using pushbuttons on the front of the sensor, and requires no pressure to set up. This allows users to reduce downtime, by programming parameters before installation. Programmable features, including PNP or NPN outputs, bar or psi measuring units, setpoint and response time delays, peak pressure memory function, and 13 pressure ranges from Vacuum to 1 bar (100 kPa), provide the flexibility to adapt and perform in any application.
The self-contained units can monitor pressure up to 60 MPa, and offer adjustable switch point response times from 5 ms to 500 ms. All models include a 4-digit, 7-segment digital display that facilitates set up via a programming menu and provides continuous pressure data.
The sensors are available in AC or DC, with analog outputs, switching outputs, or both. The outputs can be used in the standard hysteresis mode for over/under pressure or as a window. On the analog output models, the upper range of the analog output can be adjusted to meet specific application needs. Analog output models also include a shunt calibration function for manual or automatic diagnosis. The dual output version offers two setpoints that can be programmed completely independent of one another. The dual outputs can be set up for normally-open or normally-closed standard hysteresis or window function, NPN or PNP, or any combination therefore. Integral circuitry protects the sensors from short-circuit damage.
The rugged units combine a metal housing, ceramic piezoresistive measuring cell, and stainless steel hydraulic connection to provide 10-million cycle rating and extremely high pressure ratings. A clear plastic cover protects the face of the sensors while allowing the digital display and output LEDs to be seen. Turck pressure sensors are CE, UL and CSA approved, and conform to IP67 standards.
Differential pressure measurement made simple VEGA Controls SA
Pressure Measurement & Control
The VEGADIF 85 serves as an exemplary model of a differential pressure sensor. It combines universal applicability with high operational dependability and integrated overload protection, ensuring consistent performance even in the harshest conditions.
Read more...Smart pressure monitoring drives energy efficiency ifm - South Africa
Pressure Measurement & Control
The ifm PG17 electronic pressure gauge is part of the company’s next-generation PG series. It integrates IO-Link technology, enabling seamless, loss-free data transmission via a 24 V signal.
Read more...Electronic manometer with LED display ifm - South Africa
Pressure Measurement & Control
The new generation of PG type manometers are equipped with IO-Link and modern display units. Illuminated LED markings provide a quick overview of the current measured value. In addition to the various setting options for the display unit, IO-Link offers other advantages such as easy commissioning, quick sensor replacement and remote access options.
Read more...Energy measurement module for BL20 I/O System Turck Banner Southern Africa
Electrical Power & Protection
Turck’s BL20 energy measurement module enables precise monitoring of the energy consumption of single- or three-phase systems.
Read more...Status display for conveying sensor, machine and device data Turck Banner Southern Africa
Operator Interfaces, Switches & Relays
Enhance application accuracy and efficiency with the SD50 Status Display, which conveys sensor, machine and device data via text and multicolour LEDs.
Read more...Inductive IO-Link sensors Turck Banner Southern Africa
Sensors & Transducers
Turck Banner is expanding its sensor range, with inductive measuring sensors with IO-Link and an analogue output for flush and non-flush mounting.
Read more...Differential pressure measurement in gas extraction and power generation project VEGA Controls SA
Pressure Measurement & Control
Methane exploration and extraction in Lake Kivu in the East African Rift Valley has primarily focused on gas composition analysis. The VEGABAR 82 pressure transmitter was used for differential pressure measurement, the key to monitoring gas levels within the lake.
Read more...Don’t buckle under pressure VEGA Controls SA
Pressure Measurement & Control
In Africa, urban populations are increasing and infrastructure is expanding at an unprecedented pace. This makes sustainable water management and treatment more crucial than ever. By investing in VEGA pressure instrumentation, water utilities and municipalities are equipping themselves with pressure sensors that facilitate sustainable water management focused on efficiency, reliability and resilience.
Read more...New toolset for Turck Automation Suite Turck Banner Southern Africa
Industrial Wireless
Turck is expanding its Turck Automation Suite IIoT and service software platform with the TAS Cloud industrial cloud service for remote maintenance and condition monitoring.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version