Temperature Measurement


Versatile temperature transmitter

July 2005 Temperature Measurement

The JUMO dTRANS T04 four-wire transmitter series is a cost-effective device that is dedicated to temperature conversion applications. Pt100 or Pt1000 sensors or potentiometers up to 10 kΩ can be connected to detect resistance signals. The measuring range as well as the output signal can be set on the instrument itself.

The technician is able to select the required span, on-site, from a choice of 15 measuring ranges, or to define the output signal as 0 to 10 V or 0/4 to 20 mA. The only tool required is a screwdriver. Measuring ranges and outputs are calibrated with a high degree of precision and do not require any further fine calibration.

A user-friendly set-up program is available for non-standard ranges that cannot be set on the instrument itself. It can be used for configuring these ranges without steps as well as for selecting the sensor-monitoring signal. This is made possible by the combination of an analog signal path and digital measurement handling, which has proven to be a dependable method over the years.

Modelled on the housing design intended for circuit breakers, the device can be easily installed in any sub-distribution panel or switchgear cabinet. It is possible to replace or expand existing systems easily and at little cost. The transmitter can be connected without operating instructions, since the complete terminal assignment and the switch combinations are printed on the unit.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, 011 794 7057.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Bimetal thermometer with switch contacts
December 2019, WIKA Instruments , Temperature Measurement
WIKA’s model TGS55 is a stainless steel bimetal thermometer which offers high reliability and long service life. Wherever the process temperature has to be indicated on-site and, at the same time, circuits ...

Read more...
Rugged IR thermometer
December 2019, Comtest , Temperature Measurement


Read more...
Infrared monitoring of kiln shells extends refractory life
December 2019 , Temperature Measurement
Extending the life of a kiln refractory as well as preventing disastrous failures requires a good understanding of the condition of the refractory material.

Read more...
Thermocouples in gasification reactors
November 2019, WIKA Instruments , Temperature Measurement
Gasification reactors, due to their harsh process conditions, place high demands on the instruments used there. Many manufacturers have reacted to this and adapted their products accordingly, but what ...

Read more...
Hotspot detection in pressboard manufacturing applications
October 2019, R&C Instrumentation , Temperature Measurement
In the building industry, there is a product used that is commonly referred to as pressboard, also known as chipboard. Sheets of pressboard are typically 1,2 m x 2,4 m in size and are used in the construction ...

Read more...
Pair temperature probes with different cable lengths
October 2019, ASSTech Process Electronics + Instrumentation , Temperature Measurement
In heat meters for heating systems, two paired temperature probes are usually used for symmetrical installation. These must have identical cable lengths to comply with the legal regulations. Now, Jumo ...

Read more...
Precise control in joining applications
October 2019, ASSTech Process Electronics + Instrumentation , PLCs, DCSs & Controllers
Digiforce is the trusted name when comprehensive monitoring of press-fit, joining, riveting and caulking processes is needed. The models 9306 and 9310 are being successfully used in innumerable applications ...

Read more...
IR thermometers in the steel industry
September 2019, R&C Instrumentation , Temperature Measurement
In many foundry applications, temperature readings show whether processes are operating within their proper ranges, whether a reheater is too cold or too hot, whether a stand needs adjusting, or how much ...

Read more...
Hygienic pressure transmitter
September 2019, ASSTech Process Electronics + Instrumentation , Pressure Measurement & Control
The pressure transmitter Jumo Taros S46 H – available locally from ASSTech – is designed according to the hygienic requirements for precision measurement and longevity. The high-level protection type ...

Read more...
Compact IR camera with industrial accessories
September 2019, Comtest , Temperature Measurement
Comtest has announced an addition to the Optris Compact line of IR cameras – Xi 80 and Xi 400 – with new industrial accessories for use in harsh conditions. The range has a modular design and as a result, ...

Read more...