Level Measurement & Control


Low-cost ultrasonic probes

February 2005 Level Measurement & Control

GPC has released a family of ultrasonic probes that are suitable for measuring from 130 mm to 27 m with 1" NPT, 1,5" NPT, 2" NPT, 3" NPT and 6" NPT mountings. The new ultrasonic transducers (with high efficiency, narrow beams and wide frequency bandwidth) work under many conditions over a wide temperature range. They are insensitive to mountings and with help of the transceiver and smart signal processing, they eliminate unwanted echoes from tank walls, standpipes and product buildup.

The transducers provide a self-cleaning operation that sheds product build-up and condensation from their faces. The ultrasonic probes adapt to any environmental conditions, their power and receiver sensitivity adjust automatically to any distance and reflecting object.

The AGC system keeps the echo amplitude constant over the designed operating range. Built in communication with a PC allows storage of the current output and temperature in a datalogger. The ultrasonic probes can be connected in the network using RS485 with GPC's protocol and Modbus RTU.

Connecting to a PC provides access to a diagnostics utility, allowing the user to determine when there is loss of echo, temperature sensor failure, noise error, etc. Echo profiles and echo stability chart can be accessed with the software and some parameters can be changed, including reference setting and other calibration settings.

For more information contact Gauteng Process Control, 011 609 0749.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Small, inexpensive radar level transmitters
VEGA Controls SA Level Measurement & Control
Anyone who needs to keep processes running needs level measurement technology that measures reliably. However, what is needed is not always the most ‘fully featured’ solution, but the smartest one. This is exactly what VEGAPULS radar transmitters of the BASIC series do.

Read more...
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.

Read more...
A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
Multiphase level measurement
Mecosa Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...
Level measurement of leachate from sewage sludge humification
KROHNE Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...
Groundbreaking measurement system
Mecosa Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved