Moxa's MU860 enables its Universal PCI V2 to have 128-byte FIFO, and equips it with burst data mode - where it takes half of the time needed in the past to access the same amount of data via I/Os. This feature greatly decreases the CPU loading, and allows MOXA Universal PCI V2 to communicate at a bi-directional speed up to 921,6 Kbps per port, offering the throughput of over 700 Kbps. MU860 also has built-in hardware and software flow control circuit, preventing data loss in any kind of serial communication.
The Universal PCI V2 also meets 15 kV ESD surge protection, and provides 2 kV isolation protection (CP-134U-I V2 and CP-132UL-I V2), ensuring the reliability and security of data. The wide variety of connector options (DB9, DB25, RJ45 cables and boxes) provides wide application flexibility. With the ability to work with both 3,3 and 5 V server slots, and 2/4/8 independent RS232/422/485 serial ports, MOXA Universal PCI V2 multiport serial boards are well adapted for use with smaller scale systems and low profile servers, as well as for devices such as POS, retail, and hospitality applications.
For more information contact RJ Programmable Techniques, 011 781 0777, www.moxa.com
Valmet’s automation powers world’s largest air-to-water heat pump Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system for Helen’s Patola air-to-water heat pump plant and two electric boilers currently being built in Helsinki, Finland. When completed, the air-to-water heat pump plant will be the largest in the world with a full heating production capacity around 30 MW.
Read more...How to protect your industrial network RJ Connect
Editor's Choice Fieldbus & Industrial Networking
Network security is no longer a matter of preventing hacking or data breaches. Traditional defence mechanisms for perimeter protection may not fully address internal threats or device-level vulnerabilities alone.
Read more...All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
Read more...Valmet modernises turbine automation Valmet South Africa
PLCs, DCSs & Controllers
Valmet has received an order to deliver a comprehensive replacement of plant DCS and turbine control systems at Ennatuurlijk’s combined cycle power plant in the Netherlands.
Read more...How IEC 61162 standards are building smarter fleets RJ Connect
IT in Manufacturing
The maritime industry is moving through one of the most important transformations in its history. Ships that once operated as collections of independent systems are now evolving into integrated digital ecosystems, where navigation, monitoring and control systems must exchange a constant flow of data. At the heart of this transformation lies the IEC 61162 family of standards.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version