SCADA/HMI


Increasing the range of distributed AS-i networks

November 2000 SCADA/HMI

The AS interface (AS-i) power extender, in combination with masters of protection class IP 65/67, permit decentralised AS-i networks to be set up at maximum distance. Use of AS-i power supply units of a high protection class are not required. By means of this new power distribution concept, a useful range of up to 100 m is possible even in networks where the control panel and AS-i power supply are situated remotely from the field equipment. This distribution unit is directly installed in the field in the immediate vicinity of the master or gateway, of protection class IP 65. In traditional designs, for reasons of cost, the power supply unit was installed in terminal boxes. This often reduced the length of the practically usable AS-i network by the distance between the terminal box and the AS-i master.

The AS-i power extender receives 30 V d.c. from a central power supply. Through an isolating network the device provides the AS-i voltage at its output side. In the event of a low voltage level at the input side of the power extender, an AS-i network of limited extension can still be operated. Integral LEDs give information on the level of the voltage and this in turn makes it possible to determine the maximum possible distance which can be effectively connected.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

When SCADA meets the cloud
Omniflex Remote Monitoring Specialists SCADA/HMI
Engineers are faced with the challenge of unifying legacy SCADA systems with modern, IoT-based data platforms. The trouble is, when hardware from multiple manufacturers and generations are all used in the same system, compatibility becomes an issue

Read more...
Cybersecurity for potentially explosive areas
Phoenix Contact IS & Ex
The Cellulink outdoor cellular router product range from Phoenix Contact is being extended. New versions are now also available that have been specially developed for use in Zone 2 potentially explosive areas.

Read more...
Adroit Technologies strengthens Sasol Synfuels operations with digitalisation
Adroit Technologies SCADA/HMI
Adroit Technologies has reinforced its position as a trusted digitalisation partner to the petrochemical and mining sectors through its longstanding collaboration with Sasol Synfuels.

Read more...
Advanced Layer 2 switching capabilities
Phoenix Contact Electrical Power & Protection
The Raptor EP4200 and EP5200 series switches provide advanced Layer 2 switching capabilities with high performance and availability tailored for demanding critical infrastructure and energy applications.

Read more...
Adroit Technologies champions sustainable, scalable industrialisation across Africa
Adroit Technologies SCADA/HMI
Adroit Technologies has reaffirmed its commitment to accelerating Africa’s industrial growth through resilient, affordable and future-ready digital solutions for utilities, manufacturing and process industries.

Read more...
Modernising critical water systems without disruption
Rockwell Automation SCADA/HMI
The region of Waterloo needed to upgrade its SCADA and PLC systems across 157 water facilities while ensuring continuous water availability for over 60 000 residents. Their success story, powered by Rockwell Automation technology, shows that modernisation doesn’t have to mean disruption.

Read more...
Simplifiying assembly and installation of heavy-duty connectors
Phoenix Contact Electrical Power & Protection
The new Heavycon series click-in module carrier frame from Phoenix Contact simplifies the assembly and installation of heavy-duty connectors significantly.

Read more...
Terminal blocks with Push-X technology for wiring from 0,34 mm2
Phoenix Contact Electrical Power & Protection
The Push-X product range is growing. With the new XT 1,5 terminal blocks, Phoenix Contact is extending the series to include versions for conductor cross-sections from 0,34 to 2,5 mm2.

Read more...
HC Series hand controller
SCADA/HMI
The HC Series hand controller is a pre-qualified solution for demanding environments, and ensures safe and intuitive command where standard controls fail.

Read more...
Becoming a leader in alarm annunciators
Omniflex Remote Monitoring Specialists SCADA/HMI
The rise of the digital age and PC-based systems and graphical interfaces led many to view the traditional annunciator market as obsolete. Omniflex explains how the company saw the market differently to then established players like Highland and Rochester, and how it reshaped the industry.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved