One level sensor has many applications
August 2004
Level Measurement & Control
Automatic self-adjustment to suit almost any medium, including oils and wastewater, is a key benefit of the LK electronic level sensors from IFM Electronic. For users, this means that just one type of level sensor can be used for virtually every application, making installation straightforward, and eliminating the need to tie up money in large stocks of spares.
These sensors automatically compensate for the build-up of contaminants on the sensing surface. Suitable for applications involving almost any liquid, IFM's LK level sensors are available with probe lengths of 264, 472 and 728 mm. All types incorporate a three-digit seven-segment display that provides an instant readout of level. A programmable offset allows the reading to be adjusted, for example, to allow for the height of the probe above the base of a tank.
The sensors provide four switching points, each with adjustable hysteresis, which means that single LK sensors can, in some applications, replace up to eight conventional level switches. Switching points are easily adjusted by means of a simple pushbutton system, and all settings are immediately confirmed by the seven-segment display.
LK electronic level sensors are designed for operation from DC supplies in the range 10 to 30 V. The units have four outputs which are provided with short-circuit, overload and reverse-polarity protection, and are rated at 400 mA. The sensors have an IP67 protection rating, and can be used with media having temperatures from 0° to +65°C.
For more information contact Chris Huxham, Shorrock Automation, 012 345 4449 [email protected], www.shorrock.co.za
Further reading:
A fresh approach to dairy processing
VEGA Controls SA
Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.
Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa
Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.
Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA
Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.
Read more...
A new era in radiometric level and density measurement
Mecosa
Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.
Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.
Read more...
Groundbreaking measurement system
Mecosa
Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.
Read more...
Level measurement of a water sump at a sewage treatment plant
Level Measurement & Control
A major city council in South East Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. Due to the risk of flooding, the water sump must be continuously monitored. The solution is KROHNE’s OPTIWAVE 1540 radar level transmitter.
Read more...
Simplicity in measurement
Endress+Hauser South Africa
Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.
Read more...
Case History 196: Unstable condensate level control.
Michael Brown Control Engineering
Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.
Read more...
printer friendly version