April 2004Maintenance, Test & Measurement, Calibration
The latest addition to the MCR isolation amplifier series from Phoenix Contact is the MCR-FL-C-UI-2UI-DCI signal multiplier for standard analog signals. It is used for duplicating and electrically isolating (0(4) to 20 mA, 0 to 10 mA, 0(1) to 5 V, and 0 to 10 V) standard analog signals.
Module in- and outputs and the power supply are electrically isolated from one another (4-way isolation). This allows the modules to be used both on site and close to the controller for electrical isolation, signal conversion, and amplification. It means the converter can also bridge high working resistances on the transmission route. DIP-switches enable transfer behaviour calibration. It is not necessary to make zero/span potentiometer adjustments, since the module has been pre-calibrated for all signal combinations. The signal multiplier's configurability simultaneously reduces storage costs and increases availability.
Collect data three times faster SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.
Read more...The criticality of maintenance in the water and wastewater segment Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.
Read more...Comprehensive protection of the network Phoenix Contact
IT in Manufacturing
In recent years, the generation of data to create ever better transparency and control of production has become a decisive competitive factor. IIoT has also contributed to more manufacturing systems being connected to IT or cloud systems. This places higher demands on access security, which Phoenix Contact meets with the Secure Edge Box.
Read more...Quality test tools save costs at pulp and paper mill Comtest
Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.
Read more...The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.
Read more...Lube tip: foaming is affected by oil level Wearcheck
Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.
Read more...Microfine filtration boosts fuel quality and reduces equipment failure
Maintenance, Test & Measurement, Calibration
The path to contamination-free fuels relies on a combined effort from refiners to transporters, storage depots, handlers and end users. Prior to use, fuels can be polished with multi-pass microfine filtration systems such as those exclusively manufactured by ISO-Reliability Partners.
Read more...Overcurrent protection for explosion-protected areas Phoenix Contact
IS & Ex
The customisable Caparoc circuit breaker system from Phoenix Contact now also offers modules for explosion-protected areas, thereby extending the range of possible applications.
Read more...Lightning and surge protective devices Phoenix Contact
Electrical Power & Protection
The new Flashtrab-MB lightning and surge protective devices from Phoenix Contact are based on innovative triggered carbon spark gap technology.
printer friendly version