Level sensors for plastic processing industry
October 2003
Level Measurement & Control
IFM Electronic is offering a range of capacitive level sensors specifically designed for the plastic processing industry. The M30 sensors reliably detect a wide range of plastics in different materials, grain sizes and surface characteristics despite differences in residual moisture and temperature. The highest EMC immunity level is achieved through the use of noise-immune electronics, and the sensors are sufficiently sensitive to detect pre-dried granules.
Optimum sensitivity adjustment to suit the medium is made automatically by means of a pushbutton. The front face of the sensor is rated for temperatures up to 110°C and it can be mounted in direct contact with the sight glass. The time consuming setting of an air gap is no longer necessary. Its mechanical structure makes the sensors especially immune to electrostatic discharges - which occur whenever plastics are conveyed.
The user has the choice between DC and AC units and the universal switching output can be programmed to be either NC or NO. Two highly visible LEDs on the side and back of the sensors clearly indicate the switching status.
For more information contact Chris Huxham, Shorrock Automation, 012 345 4449, [email protected], www.shorrock.co.za
Further reading:
A fresh approach to dairy processing
VEGA Controls SA
Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.
Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa
Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.
Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA
Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.
Read more...
A new era in radiometric level and density measurement
Mecosa
Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.
Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.
Read more...
Groundbreaking measurement system
Mecosa
Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.
Read more...
Level measurement of a water sump at a sewage treatment plant
Level Measurement & Control
A major city council in South East Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. Due to the risk of flooding, the water sump must be continuously monitored. The solution is KROHNE’s OPTIWAVE 1540 radar level transmitter.
Read more...
Simplicity in measurement
Endress+Hauser South Africa
Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.
Read more...
Case History 196: Unstable condensate level control.
Michael Brown Control Engineering
Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.
Read more...
printer friendly version