Motion Control & Drives


BMG drives sewage and effluent management

July 2019 Motion Control & Drives

BMG supplies a range of drives designed specially for optimum efficiency in sewage treatment applications. “Nord drives, which consist of Unicase helical shaft mount geared motors, have special features to meet the requirements imposed during water treatment procedures,” says national product specialist, Deon Crous. “They consist of gears, motors and brakes that are protected against corrosion. Special covers for the hollow shaft and motor also ensure that the drive is entirely resistant to spray from tanks and the humid and aggressive conditions to which it is exposed in sewage treatment plants.”

Explosion-proof motors, with electrical and mechanical speed control, are fitted with anti-condensation heaters for stand-still periods and reinforced bearings for extended life are standard. Special vent plugs, lubricants and a valve-type oil drainage facility also enhance performance in these demanding applications.

Drives with helical flange-mounted geared motors have the flexibility to fit into restricted and awkwardly shaped areas below tank de-sludgers. The traversing platform of this system is equipped with four wheel drive to prevent wheels from slipping, even under load and in unfavourable wind conditions. Drives for revolving de-sludgers (helical bevel geared motors) and propeller-type agitators and aerator drives (flange mounted helical geared motors) can comfortably handle continuous operation 24 hours a day. Foot mounted helical geared motors are recommended in paddle mixer drives and despite heavy loads, design life can exceed 100 000 hours.

A unique feature of these drives is the Unicase gearbox that accommodates all bearing seats within a rigid one-piece casting. No bearing seats are located on bolt-on flanges or covers. Sealing surfaces are not subjected to torque stress or overhung loads and hardened wheel bodies with specially treated teeth, ensure smooth and quiet operation at maximum load capacity.

The Nord range is designed by German precision engineers, Nord Drivesystems and assembled locally by BMG according to stringent local and international quality specifications. This range has earned recognition throughout the world for reliability, efficiency, low noise levels, extended life and reduced maintenance.

For more information contact Lauren Holloway, BMG, +27 11 620 7597, laurenhy@bmgworld.net www.bmgworld.net



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

BMG’s heavy-duty mechanical face seals
Bearing Man Group t/a BMG News
BMG’s extensive range of seals and gaskets includes Trelleborg mechanical face (torric) seals, which have been specially engineered for rotating applications in arduous conditions.

Read more...
Conveyor chain for special applications
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s comprehensive range of power transmission components incorporates ZMC industrial conveyor chains that offer dependable service in diverse applications, especially in food production.

Read more...
BMG’S Nord IE5+ motor generation
Bearing Man Group t/a BMG Motion Control & Drives
BMG and German precision engineers, Getriebebau Nord, entered a partnership agreement in 1996 to assemble, distribute and support Nord Drive Systems throughout southern Africa.

Read more...
BMG gearboxes for railway maintenance
Bearing Man Group t/a BMG Maintenance, Test & Measurement, Calibration
BMG supplies the local railways sector with custom-designed planetary gearboxes for use in railway maintenance programmes.

Read more...
V-belts designed for food applications
Bearing Man Group t/a BMG Motion Control & Drives
BMG supplies a wide range of power transmission components, designed to enhance efficiency and safety in the food and beverage sector.

Read more...
Control automation excellence
SEW-Eurodrive Motion Control & Drives
Movi-C from SEW-EURODRIVE is a unique automation control system that sets a new benchmark in control automation, embracing Industry 4.0 technology.

Read more...
BMG boosts solutions through Heko products
Bearing Man Group t/a BMG News
Through the supply and support of Heko products, BMG has boosted its solutions service to customers wanting to optimise the efficiency of their bulk material conveyor systems.

Read more...
Locally manufactured knife gate valves
Bearing Man Group t/a BMG Valves, Actuators & Pump Control
BMG and Abrasive Flow Solutions (AFS) play a major role in the local valves sector, through the design, distribution, supply and support of a broad range of slurry related valves.

Read more...
Efficient agriculture systems from BMG
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s Boer Slim/Smart-Farming agricultural team works closely with farmers throughout southern Africa, assisting them with the selection, installation and operation of new electromechanical systems. These ...

Read more...
Inertial spin filters save energy
Motion Control & Drives
RTS Africa’s inertial spin filters provide an effective, maintenance-free solution to dust problems in MCC rooms, transformer rooms, control rooms and the like.

Read more...