classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT 2018

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

Temperature sensor with drift monitoring
October 2018, Temperature Measurement


The sensors of ifm electronics’ TAD series have two resistance elements with different characteristics (PT and NTC) that monitor each other permanently in the process. Drift is immediately detected and signalled, which increases the process reliability. All three process values (mean, PT element and NTC element) can be documented via IO-Link. This ensures permanent transparency for quality management, while calibration intervals can be adapted or dispensed with.

Precise 5-point calibration from the factory

Due to a 5-point temperature adjustment during the production process, the TAD temperature sensor features an accuracy of 0,2 K in the range from -10 to 130°C. Visit ifm at Electra Mining Africa Expo 10-14 September in hall 7, stand C01 to view live product demonstrations as well as other new and innovative technology offerings.

For more information contact ifm electronic SA, 086 143 6772, info.za@ifm.com, www.ifm.com


Credit(s)
Supplied By: ifm Electronic RSA
Tel: +27 12 450 0400
Fax: +27 12 450 0412
Email: info.za@ifm.com
www: www.ifm.com
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Oven temperature profiling in the automotive industry
    January 2019, R&C Instrumentation, Temperature Measurement
    For successful paint cure, irrespective of the paint chemistry being used, it is critical to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are ...
  • Control in paint shop applications
    January 2019, Temperature Controls, Temperature Measurement
    A logical combination of heating method and control is radiant heat with an Exergen IRt/c for control. The combination works well together since both the heating and measuring occur right at the surface ...
  • Collision avoidance in reverse gear
    January 2019, ifm Electronic RSA, Sensors & Transducers
    To avoid collisions during manoeuvring, ifm electronic offers an automatic collision avoidance system: a 3D camera mounted at the back of a vehicle monitors the rear area, detects objects in the travel ...
  • IR thermocouple offers noise immunity
    January 2019, Temperature Controls, Temperature Measurement
    With twisted shielded pair thermocouple extension wire, an Exergen IRt/c can be mounted as far as 300 metres from the readout device, even in harsh electrically noisy environments. The extraordinary noise ...
  • Handheld infrared thermometers
    January 2019, ASSTech Process Electronics + Instrumentation, Temperature Measurement
    Within the Calex range of infrared temperature sensors is the ST680 Series of high-quality handheld thermometers with laser sighting and large backlit LCD display. The instruments measure in a wide temperature ...
  • Optimised condition monitoring
    January 2019, ifm Electronic RSA, Maintenance, Test & Measurement, Calibration
    The VSE150 from ifm electronic is a 6-channel diagnostic system designed to evaluate four dynamic signals (e.g. rotational acceleration) and two analog inputs. The new VSE15x family provides different ...
  • Panel-mounted thermostat with safety feature
    January 2019, ASSTech Process Electronics + Instrumentation, Temperature Measurement
    Jumo’s new heatTherm P300 3-phase panel mount thermostat is available with a maximum switching capacity of 30 A/480 V. An important new safety feature capability is the trip-free function. The electromechanical ...
  • Temperature measurement within the plastics industry
    December 2018, Instrotech, Temperature Measurement
    Temperature is an important measurement parameter for many process techniques used in the plastics industry. Non-contact temperature measurement using an infrared sensor system is therefore an effective ...
  • Emerson’s compact new hygienic transmitters
    December 2018, Emerson Automation Solutions, Temperature Measurement
    Emerson has unveiled a new line of compact transmitters. Designed specifically for hygienic applications in the food and beverage industry, they will enable manufacturers to minimise downtime and lower ...
  • Intelligent valve sensor for pneumatic applications
    December 2018, ifm Electronic RSA, Pneumatics & Hydraulics
    The intelligent valve sensor for pneumatic quarter-turn actuators from ifm electronic features 360° position monitoring to allow precise and continuous scrutiny of the valve condition. Problems such as ...
  • IRt/c setup with auto-tune ­temperature controllers
    November 2018, Temperature Controls, Temperature Measurement
    In many applications, heating elements are employed to heat a product in an oven, furnace, or with jets of hot air. Conventional control devices using contact thermocouples, measure and control the oven ...
  • SpotScan gives pyrometers ­scanning ability
    November 2018, R&C Instrumentation, Temperature Measurement
    Fluke Process Instruments recently introduced the SpotScan line scanning accessory for the Endurance, Marathon, and Modline ranges of IR non-contact temperature measurement sensors. The accessory features ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.