Pressure Measurement & Control


Air velocity and flow measurement in system ducts

July 2018 Pressure Measurement & Control

Kimo manufactures a new system to measure air velocity and airflow in ducts. The Debimo measuring blades can easily be installed inside any circular or rectangular duct and the streamlined design avoids any air loss and turbulence inside the duct. This system is based on a differential probe – also called an averaging Pitot tube – and can measure dynamic pressure at different locations.

This pressure is measured with the new generation of Kimo CP300 transmitters. These models have the accuracy required to measure differential pressure, to calculate air velocity from 2 to 100 m/s and to control airflow in ducts.

When the duct sizes have been configured the system enables the user to:

• Compensate air velocity and airflow according to air temperature.

• Enable different setpoints on 2 relays.

The data can be sent through two 4-20 mA or 0-10 V analog outputs, or through the RS-485 Modbus digital output.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 (0)11 708 9200, info@asstech.co.za, www.asstech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Pressure sensor for industrial applications
WIKA Instruments Pressure Measurement & Control
WIKA’s model MTF-1 pressure sensor module is a simple and flexible option for integrating pressure measurement into a wide variety of applications.

Read more...
Differential pressure transmitter with scalable measuring range
Vepac Electronics Pressure Measurement & Control
The Halstrup Walcher P 26 differential pressure transmitter is designed for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres, as well as for special uses in machine and plant construction.

Read more...
High-performance photoelectric sensors
ASSTech Process Electronics + Instrumentation Sensors & Transducers
Wenglor’s Type 2K photoelectric sensors within the PNG/smart product range have robust stainless steel 316L housings with IP69K protection.

Read more...
Electronic differential pressure transmitter
WIKA Instruments Pressure Measurement & Control
Differential pressure measurement using primary and secondary circuits offers several advantages over conventional differential pressure methods.

Read more...
Wenglor scanners simplify decoding processes
ASSTech Process Electronics + Instrumentation Sensors & Transducers
Wenglor Sensoric has released 19 new models of the C5PC series of 1D/2D code scanners to expand its portfolio with more powerful and easy-to-operate devices.

Read more...
Electronic transformers for special requirements
ASSTech Process Electronics + Instrumentation Electrical Power & Protection
The Jumo IPC 300 electronic transformer was developed for the control of heating loads that previously required an additional transformer for power control.

Read more...
Safe pressure monitoring for vaccine production
WIKA Instruments Pressure Measurement & Control
Since vaccines are injected directly into the body, safety and purity have the highest priority in production.

Read more...
Correct choice of diaphragm seal for a pressure gauge or transmitter
SA Gauge Pressure Measurement & Control
This isolation is achieved by using a pressure-sensitive diaphragm made from a material resistant to the process medium and enclosed in a system fitted to the base of the instrument. The space between ...

Read more...
Pressure switches with metal bellows
WIKA Instruments Pressure Measurement & Control
What advantages do pressure switches with metal bellows offer and what is the basis for these?

Read more...
High-reliability float switch
ASSTech Process Electronics + Instrumentation Level Measurement & Control
ASSTech has added a new simple-to-mount horizontal design of float switch to its Jumo range.

Read more...