Climate change, urban air quality and the rising cost of energy have become the defining issues of the 21st century. With energy consumption and exhaust emissions from vehicles and transport being significant contributors to these issues, governments across the world are driving moves to secure a future where the air is safe to breathe and transport is more sustainable.
In the UK, this has seen the introduction of the government’s draft clean air policy, along with the announcement that sales of petrol-only and diesel-only vehicles will be banned from 2040, bringing the role of hybrid and electric vehicles to the fore. In evolutionary terms, these technologies are still in their infancy. Instrotech South Africa represents Avid Technology, renowned leaders in the design and manufacture of electrified powertrain and advanced thermal management systems for heavy duty and high performance electric and hybrid vehicles. Its technology also improves conventional internal combustion engine efficiency through parasitic loss reduction, efficient thermal management, lubrication, electrified ancillary systems and waste heat recovery.
The company develops powertrain improvement solutions for a wide range of electric and hybrid vehicle applications, including high performance passenger cars, heavy duty buses and trucks, as well as motorsport vehicles and off highway machinery. Its high efficiency electric motor and power electronics technology delivers class-leading electrified powertrains and propulsion systems.
In order to test and characterise the high performance electric motors used in electric and hybrid powertrains, Avid Technology designed and built a special-purpose test rig. Central to the design of the test rig is an innovative wireless rotary torque measurement device from Sensor Technology. These non-contact surface wave acoustic (SAW) transducers offer significant advantages compared with strain gauges, magnetic torque sensors and optical devices that might be fitted to a conventional dynamometer for motor characterisation.
Sensor Technology’s SAW-based devices are non-contact, robust and highly accurate. TorqSense torque sensors use two tiny SAW devices made of ceramic piezoelectric material containing frequency resonating combs. These are glued onto the drive shaft at 90 degrees to one another. As the torque increases, the combs expand or contract proportionally to the torque being applied. In effect the combs act similarly to strain gauges but measure changes in resonant frequency.
The adjacent RF pickup emits radio waves towards the SAWs, which are then reflected back. The change in frequency of the reflected waves identifies the current torque. This arrangement means there is no need to supply power to the SAWs, so the sensor is non-contact and wireless.
These characteristics make the TorqSense transducers ideal for use in the stepper drive test rig. Avid Technology sales director, Jordan Taylor explains: “The TorqSense transducer was chosen as it allowed us to use a fixed pedestal load motor and eliminate frictional losses and parallax errors from the load installation in the measurements. This allows Avid to produce very accurate performance characterisation results compared to a conventional motor dynamometer.”
Not only has the sensor delivered superior and more accurate characterisation results, it also enabled Avid to design a simpler test rig. The device has performed flawlessly in the application to date, and Avid Technology is confident that its test rig will be key in enabling it to provide even smarter powertrain electrification, delivering on its vision of a cleaner, greener world.
Advanced telemetry solutions
Editor's Choice Industrial Wireless
Namibia is one of the driest countries in sub-Saharan Africa, with an average annual rainfall below 250 mm. To address this challenge, the Namibia Water Corporation has employed one of southern Africa’s most powerful and well-proven telemetry solutions, designed and manufactured by SSE/Interlynx-SA.
Read more...The critical role of temperature measurement in flame hardening Instrotech
Temperature Measurement
Flame hardening is a heat treatment process widely used on parts made from mild steels, alloy steels, medium carbon steels and cast iron. Accurate temperature measurement is not just important, but critical for the success of flame hardening.
Read more...Novel closed-loop CP technology wins innovation award Omniflex Remote Monitoring Specialists
Industrial Wireless
Researchers at Deakin University have won the Corrosion Innovation of the Year Award at this year’s AMPP Annual Conference and Expo in Nashville, USA. The award recognised the development of a novel closed-loop cathodic protection system for localised corrosion control in challenging industrial environments, which Omniflex helped with as a technology partner.
Read more...Noncontact infrared temperature control in aluminium rolling process Instrotech
Temperature Measurement
The aluminium rolling process is critical to the aluminium manufacturing industry, where precise temperature measurement is essential for ensuring high-quality product output and protecting equipment. The Optris long-wavelength camera can accurately measure strip temperatures in cold rolling and coiling applications.
Read more...Food safety vs production: striking a balance in food and beverage manufacturing TransLution Software
Industrial Wireless
In the world of food and beverage (F&B) manufacturing, the ongoing struggle between food safety and production is a familiar scene. This conflict can escalate into a fierce struggle, but with the right systems in place, food safety and production can achieve their goals harmoniously, leading to a more successful F&B manufacturing operation.
Read more...Barcode evolution: The smart choice for modern tracking and compliance Part 2 TransLution Software
Industrial Wireless
RFID technology represents an exciting frontier in inventory tracking with its ability to eliminate the need for line-of-sight scanning. By using radio waves to transmit data wirelessly, RFID systems offer the tantalising possibility of simultaneous scanning of multiple items and real-time inventory visibility.
Read more...Barcode evolution: The smart choice for modern tracking and compliance Part 1
Industrial Wireless
Imagine a world without barcodes, where every item in a warehouse is manually recorded, checkout lines stretch endlessly, and supply chain tracking relies on handwritten logs. It sounds like a logistical nightmare, yet this is how businesses conducted business historically. Today, barcodes are so deeply embedded in modern operations that their impact often goes unnoticed.
Read more...Novel closed-loop CP technology for corrosion control Omniflex Remote Monitoring Specialists
Industrial Wireless
Cathodic protection specialist, Omniflex has collaborated with researchers at Deakin University to develop corrosion monitoring electronics for a novel closed-loop cathodic protection system for localised corrosion control in challenging industrial environments.
Read more...How CP system design can support ESG commitments Omniflex Remote Monitoring Specialists
Industrial Wireless
Major infrastructure like wharves, bridges, pipelines and tanks are under constant threat of corrosion, which can render them unsafe. David Celine, managing director of cathodic protection specialist, Omniflex explains how CP system design can support ESG commitments while simultaneously lowering costs and improving maintenance capabilities.
Read more...Rotary atomisers for efficient paint spraying Instrotech
Sensors & Transducers
Painting the bodywork is an integral component of vehicle manufacturing. Keller supplied intrinsically safe pressure transmitters and intrinsically safe temperature sensors to a client producing paint robots for the car industry.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version