Temperature Measurement


32-channel temperature scanner

October 2016 Temperature Measurement

The Sensor Connection a division of Harold G. Schaevitz Industries, has expanded its line of measurement and control instrumentation with the addition of the model PMD-MXT series of temperature scanner indicators. This 32-channel microprocessor-based device provides continuous monitoring of up to 32 channels of thermocouple or RTD sensors. The large LED display is easy to read, even at a distance and rows of LED annunciators warn of specific channel alarm conditions. The scanner has 2 selectable HI/LO, HI/HI, or LO/LO alarm setpoints, configured through the front panel push buttons. During an alarm condition a front panel LED annunciator is enabled and an internal relay contact output is engaged. The scanner’s display will auto cycle through all input channels at a user determined rate of 0,5 to 10 seconds per channel. Other features include:

• Temperature units field selectable for °C or °F.

• Auto or manual scanning.

• Adjustable auto scan rate.

• Limit alarm trip points adjustable per channel.

• Powered by 20 to 28 VDC.

For more information contact Chris Branstrom, The Sensor Connection, +1 248 636 1515, chrisb@thesensorconnection.com, www.thesensorconnection.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Bimetal thermometer with switch contacts
December 2019, WIKA Instruments , Temperature Measurement
WIKA’s model TGS55 is a stainless steel bimetal thermometer which offers high reliability and long service life. Wherever the process temperature has to be indicated on-site and, at the same time, circuits ...

Read more...
Infrared monitoring of kiln shells extends refractory life
December 2019 , Temperature Measurement
Extending the life of a kiln refractory as well as preventing disastrous failures requires a good understanding of the condition of the refractory material.

Read more...
Thermocouples in gasification reactors
November 2019, WIKA Instruments , Temperature Measurement
Gasification reactors, due to their harsh process conditions, place high demands on the instruments used there. Many manufacturers have reacted to this and adapted their products accordingly, but what ...

Read more...
Hotspot detection in pressboard manufacturing applications
October 2019, R&C Instrumentation , Temperature Measurement
In the building industry, there is a product used that is commonly referred to as pressboard, also known as chipboard. Sheets of pressboard are typically 1,2 m x 2,4 m in size and are used in the construction ...

Read more...
Pair temperature probes with different cable lengths
October 2019, ASSTech Process Electronics + Instrumentation , Temperature Measurement
In heat meters for heating systems, two paired temperature probes are usually used for symmetrical installation. These must have identical cable lengths to comply with the legal regulations. Now, Jumo ...

Read more...
IR thermometers in the steel industry
September 2019, R&C Instrumentation , Temperature Measurement
In many foundry applications, temperature readings show whether processes are operating within their proper ranges, whether a reheater is too cold or too hot, whether a stand needs adjusting, or how much ...

Read more...
Compact IR camera with industrial accessories
September 2019, Comtest , Temperature Measurement
Comtest has announced an addition to the Optris Compact line of IR cameras – Xi 80 and Xi 400 – with new industrial accessories for use in harsh conditions. The range has a modular design and as a result, ...

Read more...
IR measurement optimises plastic stationary and rotary thermoforming
August 2019, R&C Instrumentation , Temperature Measurement
Background Thermoforming is the process by which a thermoplastic sheet is made soft and pliable by heating, and bi-axially deformed by being forced into a three-dimensional shape. This process may take ...

Read more...
Temperature profiling in aluminium heat treatment
July 2019, R&C Instrumentation , Temperature Measurement
Many high volume production foundries use continuous furnaces for the heat treatment of castings. Cylinder heads, wheels, suspension components and many other aluminium alloy products are placed in wire ...

Read more...
Speeding up the inkjet drying process
July 2019, Temperature Controls , Temperature Measurement
For high speed printing processes, the limiting factor for the productivity of the equipment is usually ink drying time. To maximise printing speed without quality loss, it is important to be able to ...

Read more...