Setting the standard for the drive industry
April 2016
Motion Control & Drives
The new generation of energy-saving variable speed drives from LSIS draws on Future Smart technology to bring significant savings in the cost of power and maintenance when installed in an HVAC or pumping system. The LISIS-H100 monitors the phases and demand of the motor internally and saves power without compromising the efficiency of the motor. As a result less power is used and the motor works more efficiently, with less possibility of failure.
The soft fill operation prevents unnecessary damage to the pump caused by severe pressure changes during startup sequences. In addition the start and stop ramps prevent pump damage by changing the ramp times used for acceleration and deceleration at the beginning and end of operation. Water hammer caused by stopping the motor or closing a valve is minimised by the innovative application of the deceleration valve ramp. The flow control feature corrects hydraulic losses that occur in long distance pipelines such as hydrants and irrigation systems by adding compensation rates to the inverter’s output frequency.
With multiple motor control (MMC), a single drive is used to control multiple motors in pumps or cooling towers. With one main motor and five auxiliary motors, synchronised multiple operations smoothly balance the system for a seamless HVAC or reticulation system. A real-time clock (RTC) timeously helps select functions at set points. The fire mode is designed for emergencies such as a fire in a pump station or fan exhaust while the motors are still operational. The drive continues to protect the system and run the operation until intervention takes place and there is motor and/or drive failure. These features all add up to a highly effective means of reducing power and maintenance costs.
For more information contact Ana-Digi Systems, 086 132 3334, [email protected], www.anadigi.co.za
Further reading:
Premium slewing rings from SKF
SKF South Africa
Motion Control & Drives
SKF’s slewing bearing portfolio spans standard and customised designs across a wide range of types and sizes, backed by advanced monitoring, remanufacturing services and application engineering expertise for demanding industrial applications.
Read more...
World’s first fully electric hydrogen fuel cell aircraft engine
Motion Control & Drives
Airbus and MTU Aero Engines are establishing a joint venture to industrialise hydrogen-electric propulsion systems for commercial aviation, combining liquid hydrogen expertise with fuel cell development to support the ZEROe programme’s 2035 target.
Read more...
Monopile handling innovations boost offshore wind farm
Motion Control & Drives
Mammoet’s XXL monopile transport system and new MTC 1600 terminal crane are helping offshore wind developers safely marshal and install ever larger monopile foundations, as demonstrated on Van Oord’s Baltic Power project.
Read more...
Automation without the mega factory
Yaskawa Southern Africa
Motion Control & Drives
Mid-sized South African manufacturers are turning to targeted, low-risk automation to solve specific bottlenecks rather than chasing full factory transformation, helped by retrofit-friendly robotics and advanced simulation software.
Read more...
Duplex worm gears for precision backlash adjustment
Motion Control & Drives
KHK USA has introduced duplex worm gears that allow precise backlash adjustment through simple axial movement of the worm shaft, eliminating the need for gearbox housing alterations during assembly or maintenance.
Read more...
Choosing the right level of protection in modern automation
Motion Control & Drives
Choosing the right ingress protection rating for a motor or drive is less about maximising the number, and more about understanding what the machine will actually face in operation.
Read more...
Osterwalder launches multi-plate, fully electric powder press
Motion Control & Drives
Osterwalder Technology has launched the MPneo 480, a 480 kN fully electric multi-plate powder press with up to six cross-pressing modules. Designed for hard metals, ceramics and advanced engineered materials, the press supports complex geometries and offers optional
Read more...
Ground helical racks for superior precision and durability
Motion Control & Drives
KHK USA has announced its ground helical rack series, engineered for smooth operation, high torque transmission and long-lasting performance in precision motion systems. The racks are designed for demanding environments such as machine tools, high-speed automation equipment and precision positioning systems.
Read more...
SpinDrive launches Magma X100 active magnetic bearing controller
Motion Control & Drives
SpinDrive has launched the Magma X100, a new active magnetic bearing controller platform for applications up to 150 kW. The platform brings oil-free, frictionless bearing technology to mobile machinery, semiconductor equipment and other high-speed rotating equipment at a cost comparable to conventional bearing solutions.
Read more...
Sealed split spherical roller bearings deliver rapid installation and reduced downtime
SKF South Africa
Motion Control & Drives
SKF Cooper sealed split spherical roller bearings combine a split design with premium engineering to enable rapid installation and simplified maintenance, reducing mean time to repair by up to 70% and keeping operations running in sectors from mining to food and beverage.
Read more...
printer friendly version