Enhanced compressor efficiency with frequency converters

Motion Control & Drives

Electric drive, inverter & motor suppliers

Motion Control & Drive suppliers

Position/motion control suppliers

printer friendly version

February 2016 Motion Control & Drives

Tectra Automation recently supplied Bosch Rexroth frequency converters to two Gauteng companies aiming to reduce their energy consumption and operational expenditure through more efficient, on-demand motor performance.

With electric motors the single biggest consumers of power within industrial automation, more and more companies are implementing measures to overcome the costly peaks in consumption that can increase the electrical cost of that unit by up to seven times its operating current.

One such company is a packaging manufacturer in Johannesburg. Tectra Automation supplied a 160 kW Type Fe frequency converter in November 2014, to drive the company’s 75 kW air compressor in an open loop.

“Analysing the pre- and post-installation readings, indicated that the plant had shed over 100 kVA of its power load during normal operation after we had installed the frequency converters,” explains Georg Venter, product manager, Tectra Automation.

This was a relatively straightforward installation that merely drove the motor connected to a pressure switch. A second company, a steel producer in Kliprivier, acquired an additional pneumatic component to drive its 30 kW air compressor.

“We supplied a pressure transducer in a closed loop circuit that will provide even greater efficiency in the way the motor is used. It responds to the requirements of the accumulator proportionally, relative to the pressure inside,” explains Venter. “The pressure transducer, from our range of Aventics pneumatic components, is part of our turnkey drive solutions for air compressors.”

Tectra Automation deliberately oversized the electrical panel it had built for this customer, as the company plans to fit a second VSD for their second compressor at a future date.

In addition to curtailing the sudden power spikes associated with overcoming motor inertia, the frequency converters also reduce the mechanical stress exerted within the system, thus prolonging the life of the affected mechanical components.

Bosch Rexroth frequency converters Type FE for motors from 750 W to 160 kW, provide a simple, accurate and reliable three-phase drive control solution for AC motors.

For more information contact Georg Venter, Tectra Automation, +27 (0)11 974 9400, [email protected], www.tectra.co.za

Share this article:

Motion Control & Drives

Enhanced compressor efficiency with frequency converters

Further reading:

Published by Technews