Valves, Actuators & Pump Control


Valves for gas applications

May 2015 Valves, Actuators & Pump Control

Mitech’s locally designed and manufactured damper valves are specifically used for gas control in low pressure and high temperature gas applications. The dampers can be manufactured in flanged, wafer or lugged pattern designs in single-door, double-door or oblong vane-type configurations. Robust in design, they have carbon or stainless steel bodies and discs and the shaft seals can be either PTFE or graphite, depending on the operating temperature. The dampers are subject to a leak rate not exceeding 1% of their rated flow and they are available in sizes from 200 up to 2500 mm with flange ratings of up to #600. If required larger sizes are available on request. Dampers are ideal for use in the mining, petrochemical, food, breweries, pulp and paper and power generation industries.

For more information contact Pieter Badenhorst, Mitech, +27 (0)11 927 4850, enquiries@mitech.co.za, www.mitech.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Schubert & Salzer and Macsteel
September 2021, Macsteel Fluid Control , Valves, Actuators & Pump Control
The demand on valves, particularly in tyre production plants, is extreme with tyre curing presses working constantly at high temperatures and pressures.

Read more...
Chinese LNG tanker fitted with ARCA anti-surge valves
September 2021, Valve & Automation , Valves, Actuators & Pump Control
ARCA anti-surge valves avoid surging by accurately adjusting the gas circulation or blow-off flow, effectively protecting the safety of the compressor unit.

Read more...
Electrified subsea actuator for offshore production
September 2021 , Valves, Actuators & Pump Control
Bosch Rexroth has engineered the SVA R2 Subsea Valve Actuator as a disruptive innovation for electrically actuating valves in the subsea process industry. It can replace conventional hydraulic cylinders ...

Read more...
Eliminate bearing failures in TOVs
August 2021, Valve & Automation , Valves, Actuators & Pump Control
Bearing failures are among the highest root causes of failure in triple offset valves (TOV) for tight shutoff applications. This issue is directly attributed to the need to have metal bearings with very ...

Read more...
Locally manufactured knife gate valves
August 2021, Bearing Man Group t/a BMG , Valves, Actuators & Pump Control
BMG and Abrasive Flow Solutions (AFS) play a major role in the local valves sector, through the design, distribution, supply and support of a broad range of slurry related valves.

Read more...
Protect your pump and keep it longer
July 2021, Elemental Analytics , Valves, Actuators & Pump Control
Unexpectedly losing a pump is often an expensive or even a dangerous problem in a chemical plant.

Read more...
Locally valves manufactured for tailings pipeline
June 2021 , Valves, Actuators & Pump Control
The AFS manufacturing plant in Benoni is equipped with advanced equipment and is supported by specialists who offer dependable technical support to ensure the optimum safety, efficiency and extended service life of every system.

Read more...
New flange monoblock with shut-off valve
March 2021, WIKA Instruments , Valves, Actuators & Pump Control
WIKA’s new monoblock with flange design integrates a shut-off valve to separate the process from the instrument side.

Read more...
The Stafsjö HX story – greater demand calls for action
February 2021, Valve & Automation , Valves, Actuators & Pump Control
As a knife gate valve supplier, Stafsjö supplies product solutions to realise efficiency and production goals in pulp and paper applications.

Read more...
Drives for solar-powered pump systems
February 2021, Bearing Man Group t/a BMG , Valves, Actuators & Pump Control
BMG advises on how to optimise efficiency and extend the service life of solar-powered pumping systems by selecting the correct drives.

Read more...