A valve for life
September 2014
Valves, Actuators & Pump Control
The standard type triple eccentric valve has very limited maintenance options which render it unserviceable should there be any wear to the valve seat or it gets damaged as the seat is machined into the body with a weld-overlay.
Since its launch at Valve World 2000, Orton gained an edge in this highly competitive technology by introducing its second generation triple eccentric valve – a valve where not only the seal on the disc can be changed, but the seat in the body as well.
Triple eccentric valves are metal seated with resilient seat capabilities – there is zero leakage through the seat and because of the triple offset design there is no rubbing between seat and seal ring on the disc, thus sealing integrity is maintained. That is the theory, however, in practice the body seat does sometimes wear and the valve could eventually start to leak. The cost of re-machining the body seat of a standard type valve is unviable, which then means the valve must be replaced.
Another motivating factor for Orton to develop its bolted seat design was to extend the range of applications for the valve. Being able to service a valve is an important feature for applications where abrasive fluids, corrosive media, high cycles or thermal stresses may cause damage to the sealing components (body seat and seal ring). With the introduction of this feature, the choice of suitable seat materials has increased over the limited traditional ones that may only be welded to the base body material.
For more information contact Keith Mitchell, Heaton Valves Africa, +27 (0)31 902 8241, [email protected], www.heatonvalves.co.za
Further reading:
High-flow solenoid valve
Emerson Automation Solutions
Valves, Actuators & Pump Control
Emerson has introduced the new ASCO Series 327C solenoid valve, which features a direct-acting, high-flow design that provides superior flow-to-power ratio. It permits high flows at minimum power levels, making it ideal for use in power plants, refineries, and chemical processing facilities.
Read more...
Proportional cartridge valve series is the fastest in its class
Valves, Actuators & Pump Control
Parker Hannifin is introducing the enhanced version of the proportional cartridge throttle valve series, TFP. The new pilot valve further reduces the step response times by up to 30%, making the TFP the fastest valve in its class.
Read more...
Proportional cartridge valve series is the fastest in its class
Valves, Actuators & Pump Control
Parker Hannifin is introducing the enhanced version of the proportional cartridge throttle valve series, TFP. The new pilot valve further reduces the step response times by up to 30%, making the TFP the fastest valve in its class.
Read more...
Inspection system for leak detection in valves in hazardous areas
Extech Safety Systems
Valves, Actuators & Pump Control
Leaking valves in industrial plants not only lead to loss, safety risks and possible contamination and pollution, but also result in high economic costs. Therefore, valves in hazardous areas require regular proper inspection and preventive maintenance to ensure their functionality.
Read more...
Control head for automation of hygienic process valves
Burkert South Africa
Valves, Actuators & Pump Control
Burkert’s Type 8681 control head is optimised for decentralised automation of hygienic process valves. Thanks to its universal adapter, it can be combined with all normal commercial butterfly valves, ball valves and single- and double-seated valves.
Read more...
Hydroformed tube valve body
Burkert South Africa
Valves, Actuators & Pump Control
One of the most common necessities for manufacturing pharmaceuticals, cosmetics, food and beverages are diaphragm valves. What used to be a dull two-way race between forged and cast body variants is now being challenged by an exciting, ground-breaking technology. The hydroformed, light-weight diaphragm tube valve body will change the way you think about plant design and operation.
Read more...
Global pumping giant ready to support hydrogen economy
Valves, Actuators & Pump Control
With abundant sunshine and wind, southern Africa is perfectly positioned to become a global powerhouse in green hydrogen production. Two key projects are already in advanced stages of development in Namibia. KSB has identified the vast potential of these types of projects in southern Africa, and through its KSB Pumps and Valves subsidiaries in Namibia and South Africa is investing heavily in bringing the right skills to the region.
Read more...
Compact valve position indicator
Emerson Automation Solutions
Valves, Actuators & Pump Control
Emerson’s new TopWorx DVR Switchbox is an entry-level addition to the DV Series of valve position indicators. It combines a durable resin enclosure, compact size, and a patented cam design that provides a reliable valve position feedback for water and wastewater systems, food and beverage production lines, and industrial utilities.
Read more...
Precision, control and performance in regulators and control valves
Valve & Automation
Valves, Actuators & Pump Control
Cashco has long been a trusted name in industrial control solutions, offering a broad range of regulators and control valves designed to meet the rigorous demands of various industries. There are two key Cashco product lines, its regulators and the Ranger QCT control valve.
Read more...
Advanced solutions for valves
Bearing Man Group t/a BMG
Valves, Actuators & Pump Control
BMG delivers state-of-the-art valve solutions to diverse industries across Africa, in collaboration with InterApp, a global leader in the design and manufacture of high-quality valves.
Read more...