Rototherm’s Tank-i has been developed for level measurement on the vehicle fuel tank and is a solution that allows fleet operators to monitor, manage and ultimately protect their fuel.
Principle of operation
A small, non-invasive ultrasonic sensor is bonded to the external base of the fuel tank. The system calculates the height of the liquid in the tank from the time taken for the signal to be transmitted and then received from the liquid surface. Signals from the transducer are fed into the processor and then output to a separate system. The package is supplied as a sensor/processor pair. The system can be configured to work in a low power mode which can be controlled from the telemetry system where required. When combined with a telemetry tracking system, the fleet manager can get an accurate and up to date indication of the vehicles’ fuel consumption and be warned of any excess consumption, due possibly to fuel theft.
Tank-i is ATEX (safety) approved for hazardous areas and easy to install with no downtime and no penetration of the tank vessel. It can be retrofitted to existing fleets and is unaffected by temperature fluctuations. With no moving parts there is no maintenance on the unit.
Currently, Tank-i has found application in refrigerant receivers; low pressure gas (LPG) tanks; distilled spirits vats; beer tanks and tankers; pure water tanks; liquid chlorine tanks; acid and solvents tanks. Tank-i is used by leading beverage, pharmaceutical and chemical companies around the world for accurate, reliable, simple and safe tank contents gauging.
Where corrosion meets control VEGA Controls SA
Level Measurement & Control
Reliable level measurement is essential in copper and cobalt processing, and at KCC, VEGA Controls is helping ensure uninterrupted operations with robust vibrating level switch technology.
Read more...Safety, hygiene and quality management for Africa’s pharmaceutical manufacturing industry VEGA Controls SA
Level Measurement & Control
VEGA sensors support critical processes in pharmaceutical manufacturing such as fermentation, purification, formulation, filling, storage and CIP/SIP cleaning cycles. Their design ensures that pharmaceutical manufacturers can maintain sterility, reduce downtime and achieve consistent batch quality, even in demanding production environments.
Read more...Level measurement for hygienic applications Endress+Hauser South Africa
Level Measurement & Control
Endress+Hauser’s Liquiphant is considered to be the most reliable and safe point level detector in industrial plants. The latest generation of devices is ready for Industry 4.0 and, with the Liquiphant FTL63, is ideally suited for applications with hygienic requirements.
Read more...Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Sensors measure palm oil tank level Instrotech
Level Measurement & Control
The Senix ToughSonic 30 accurately measures and monitors the level of palm oil in large tanks approximately nine metres in height.
Read more...Precise level control
Level Measurement & Control
Whether in silos, tanks or process containers, the exact detection of fill levels is crucial for stable, safe and economical production processes. However, many common measuring methods quickly reach their limits in practice.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version