Electrical Power & Protection


The energy water nexus

January 2013 Electrical Power & Protection

Whether or not you subscribe to the manmade global warming and ‘peak oil’ arguments, it is clear to almost everyone in the industrial world that ‘business as usual’ is not sustainable indefinitely. Fossil fuels are becoming harder and more costly to extract. The nuclear option is being taken off the table in many countries. Wind and solar electric generation are still not base load solutions (and may never be). And many world regions are already suffering some degree of water stress.

The World Business Council for Sustainable Development’s (WBSD) Vision 2050 Project explores ways in which the approximately nine billion people projected to be living on the planet in 2050 can live well by living within the limits of the planet: living in such a way that an acceptable standard can be sustained within the available resources and without further harm to biodiversity, climate and other ecological systems. Vision 2050 is not a project undertaken by a bunch of ‘tree huggers’, but by the CEOs of 29 global companies, largely in industries like utilities, oil & gas, chemicals, consumer packaged goods and mining & metals.

According to the project’s report, “All types of ingenuity will be needed over the next 40 years. Although distinct, the interconnectedness of issues such as water, food and energy relationships must be considered in an integrated and holistic way, with tradeoffs that must be understood and addressed.”

Global energy supply insufficient for future demands

While it is likely that per capita consumption of energy will go down somewhat in developed economies, this will not be the case in emerging economies. This is particularly true in China, India, and Brazil where more energy will be required to sustain industrial development.

According to Gerald Schotman, chief technology officer of Royal Dutch Shell, by 2050 global energy demand will double and could even triple from its 2000 level if emerging economies follow historical development patterns. According to Schotman, even if renewable energy sources continue to grow at a promising rate (potentially supplying as much as 25% of the world’s energy by 2050), and future technological advances enable oil and gas to be extracted from increasingly remote and difficult locations, a large gap is likely to remain between demand and supply: a gap as big as the total output of the energy industry in 2000.

Exxon-Mobil’s forward-looking report, The Outlook for Energy: A View to 2040, predicts that global energy demand will be about 30% higher in 2040 compared to 2010. According to the report, while energy demand in OECD countries will remain essentially flat, non-OECD demand will grow by close to 60%.

Significant shortfall looms for fresh water

According to a report on water challenges prepared by United Nations Environment Programme Finance Initiative (UNEP FI) in conjunction with the Stockholm International Water Institute (SIWI), water scarcity currently affects many regions of the world. “Without a significant reversal of economic and social trends, it will become more acute over time. Although water is considered a renewable resource, in many parts of the world, water resources have become so depleted or contaminated that they are unable to meet ever increasing demands. The challenges are more acutely felt in developing countries.”

According to the report, this has become a major factor impeding both economic development and business operations. The challenges associated with water scarcity are emerging as a strategically important risk for global businesses and their financial backers. Furthermore, rapid globalisation within the business supply chain only increases this risk. Thus, according to the report, the business case for addressing water challenges in a strategic manner only gets stronger.

Energy and water closely intertwined

At the macro level, it is clear that energy and water are closely intertwined. It takes a lot of water to explore, produce and refine fossil fuels and even more to generate electricity from these fossil fuels. In fact, by some estimates, power generation accounts for approximately 40% of all water withdrawals in the US.

On the other side of the coin, due to the large, energy-intensive pumps involved and the energy intensive nature of many of the treatment processes currently in use; it takes significant electricity to withdraw, treat, and transport freshwater, wastewater, and increasingly, both saltwater and reused water. According to one EPRI report, approximately 4% of the electricity generated in the US is used to pump and treat water.

To reduce current and future business risks and help ensure business continuity, it is important for hydrocarbon processing plants to monitor, measure and manage their energy and water consumption independently; as well as fully understand the often interactive relationships between the two. If organisations have not already started to do so, ARC Advisory Group recommends that they start putting in place and implementing initiatives on both the strategic and tactical levels to use both energy and water more efficiently and effectively.

It is also important to address the cultural and educational issues so that all employees understand that it is in their own best interests, as well as the best interest of the company and the community at large, to minimise energy and water consumption and related emissions.

For more information contact Paul Miller, ARC Advisory Group, +1 781 471 1126, [email protected], www.arcweb.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Boiler selection for optimal thermal energy performance
Electrical Power & Protection
The changing world of boilers means companies wishing to improve their thermal energy efficiencies while containing costs and environmental impacts must make careful and informed decisions. AES’s rich pool of experience, ability to keep pace with new steam trends and technologies, and understanding of their clients’ production processes can assist clients to weigh up different options in a careful and informed manner.

Read more...
Securing Africa’s energy future starts at home
ACTOM Electrical Machines Electrical Power & Protection
Africa’s energy demands are surging, but the current reliance on imported solar technology leaves the continent vulnerable. This is why the prospect of building inverters and lithium batteries locally, designed for South Africa’s specific needs, is so promising.

Read more...
Dry-type transformers for Dutch intake substation
Electrical Power & Protection
A data centre in the Netherlands is the site of a recent innovation on the transformer landscape, where TMC Transformers has designed, manufactured and installed dry-type transformers in a large intake substation.

Read more...
Generators: The muscle in the new energy mix
WEG Africa Electrical Power & Protection
Contrary to their reputation as noisy and dirty, generators are a key part of modern energy supplies. Generators are reliable electricity workhorses in times of need. But they are also becoming welcome additions to modern energy mixes through efficiency improvements, noise reduction and flexible design choices.

Read more...
Doubling down on sustainability commitments: six practical solutions to meet the AI challenge
Schneider Electric South Africa Electrical Power & Protection
The best time to plant a tree, the old saying goes, was 20 years ago, and the second-best time is today. The same concept holds true to sustainability in the data centre industry.

Read more...
Condition-based maintenance can revolutionise business continuity
Schneider Electric South Africa Electrical Power & Protection
As businesses experience growing pressure to enhance operational efficiency and reduce downtime due to electrical failure, condition-based maintenance becomes essential for preventing unforeseen equipment breakdowns by assessing the real-time health of electrical systems.

Read more...
Ball valves and actuators to optimise HVAC performance
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric South Africa offers the full range of innovative SpaceLogic and EasyLogic ball valves and actuators. These cutting-edge products are designed to optimise HVAC system performance, ensuring comfort and energy efficiency in industrial, commercial and residential buildings.

Read more...
Power over Internet splitter for reliable power distribution
Vepac Electronics Electrical Power & Protection
A manufacturing facility requires a stable power supply for its wireless access points mounted across the factory floor. However, these devices do not support direct PoE input. By deploying the IPS-342P PoE Splitter from Vepac, the facility can efficiently convert PoE power from the network switch into 24 V DC output.

Read more...
World’s fastest 16-bit arbitrary waveform generator
Vepac Electronics Electrical Power & Protection
The ARB Rider AWG-5000 is the world’s fastest 16 bit Arbitrary Waveform Generator, with 6,16 GS/s real time update rate (12,32 GS/s in RF mode) and 16 bit vertical resolution.

Read more...
Wireless test tools
Comtest Electrical Power & Protection
Fluke has on offer the Fluke 376 FC True-RMS Clamp Meter with iFlex, the most advanced troubleshooting tool for industrial and commercial electricians

Read more...