Spraywater control valves
November 2012
Valves, Actuators & Pump Control
PSV Mitech’s globe control valves for attemporator spraywater control have been operating successfully at a power station for over seven years with zero defects. The valve bodies were designed to ANSI 1500# with butt weld ends. The trims were a combination design with the ZZ trim at the bottom for the low-flow high-pressure drop startup condition, and a cavitation control trim at the top to handle the high-flow low-pressure drop running conditions. The tri-linear characteristic increased the operating range ability to over 100:1.
The valves were designed to operate with an electric actuator and they had a standard type bonnet with stainless steel Grafoil gaskets. The line size was 80 mm with an incoming pressure of 172 bar G. Maximum flow was 5 kg/s.
For more information contact Greg Walker, PSV Mitech, +27 (0)11 657 6000, [email protected], www.mitech.co.za
Further reading:
Pumps lead the way with advanced technology
Valves, Actuators & Pump Control
The KSB GIW MDX pump has consistently represented a major leap forward in mill duty applications, with KSB relying on customer feedback to improving the design continuously.
Read more...
Wireless leak detection valve
Valves, Actuators & Pump Control
Designed to prevent water leakage by automatically shutting off the water supply when a leak is detected, the Runxin F104 wireless leak detection valve is one of the latest offerings from Allmech.
Read more...
Ball valves and actuators optimise HVAC performance
Schneider Electric South Africa
Valves, Actuators & Pump Control
Schneider Electric offers the full range of innovative SpaceLogic and EasyLogic ball valves and actuators. These cutting-edge products are designed to optimise HVAC system performance, ensuring comfort and energy efficiency in commercial and residential buildings.
Read more...
Alfa Laval expands hygienic valve portfolio
Valves, Actuators & Pump Control
Alfa Laval is expanding its hygienic valve portfolio by introducing the Unique SSV pressure relief valve and the Leakage Detection butterfly valve, alongside new smaller sizes of the Unique Mixproof CIP and Unique Mixproof process valves.
Read more...
Preparing pump systems for adverse weather conditions
Valves, Actuators & Pump Control
As the severity of storms in South Africa increases, so has the rush of sediment-laden water become a major issue and a significant challenge for irrigation. When sediment levels rise to just 10 grams per litre or more, the risk of pump wear and dam silting increases dramatically.
Read more...
High-flow solenoid valve
Emerson Automation Solutions
Valves, Actuators & Pump Control
Emerson has introduced the new ASCO Series 327C solenoid valve, which features a direct-acting, high-flow design that provides superior flow-to-power ratio. It permits high flows at minimum power levels, making it ideal for use in power plants, refineries, and chemical processing facilities.
Read more...
Proportional cartridge valve series is the fastest in its class
Valves, Actuators & Pump Control
Parker Hannifin is introducing the enhanced version of the proportional cartridge throttle valve series, TFP. The new pilot valve further reduces the step response times by up to 30%, making the TFP the fastest valve in its class.
Read more...
Proportional cartridge valve series is the fastest in its class
Valves, Actuators & Pump Control
Parker Hannifin is introducing the enhanced version of the proportional cartridge throttle valve series, TFP. The new pilot valve further reduces the step response times by up to 30%, making the TFP the fastest valve in its class.
Read more...
Inspection system for leak detection in valves in hazardous areas
Extech Safety Systems
Valves, Actuators & Pump Control
Leaking valves in industrial plants not only lead to loss, safety risks and possible contamination and pollution, but also result in high economic costs. Therefore, valves in hazardous areas require regular proper inspection and preventive maintenance to ensure their functionality.
Read more...
Control head for automation of hygienic process valves
Burkert South Africa
Valves, Actuators & Pump Control
Burkert’s Type 8681 control head is optimised for decentralised automation of hygienic process valves. Thanks to its universal adapter, it can be combined with all normal commercial butterfly valves, ball valves and single- and double-seated valves.
Read more...
printer friendly version