IT in Manufacturing


Quantum refrigerator paves way for reliable quantum computers

February 2025 IT in Manufacturing

Quantum computers require extreme cooling to perform reliable calculations. One of the challenges preventing quantum computers from entering society is the difficulty of freezing the qubits to temperatures close to absolute zero. Now, researchers at Chalmers University of Technology, Sweden, and the University of Maryland, USA, have engineered a new type of refrigerator that can autonomously cool superconducting qubits to record low temperatures, paving the way for more reliable quantum computation.

Quantum computers have the potential to revolutionise fundamental technologies in various sectors of society, with applications in medicine, energy, encryption, AI, and logistics. While the building blocks of a classical computer – bits – can take a value of either 0 or 1, the most common building blocks in quantum computers – qubits – can have a value of 0 and 1 simultaneously. The phenomenon is called superposition and is one of the reasons why a quantum computer can perform parallel computations, resulting in enormous computational potential. However, the time a quantum computer can work on a calculation is still significantly constrained because it spends a lot of time correcting errors.

“Qubits, the building blocks of a quantum computer, are hypersensitive to their environment. Even extremely weak electromagnetic interference leaking into the computer could flip the value of the qubit randomly, causing errors and subsequently hindering quantum computation,” says Aamir Ali, research specialist in quantum technology at Chalmers University of Technology.

Demonstrates record low temperatures

Today, many quantum computers are based on superconducting electrical circuits that have zero resistance and therefore preserve information very well. For qubits to work without errors and for longer periods in such a system, they need to be cooled to a temperature close to absolute zero, equivalent to minus 273.15 degrees Celsius or zero Kelvin. The extreme cold puts the qubits into their lowest energy state, known as the ground state, equivalent to value 0, a prerequisite for initiating a calculation.

The cooling systems used today, namely dilution refrigerators, bring the qubits to about 50 millikelvin above absolute zero. The closer a system approaches to absolute zero, the more difficult further cooling is. According to the laws of thermodynamics, no finite process can cool any system to absolute zero. Now, the researchers have constructed a new type of quantum refrigerator that can complement the dilution refrigerator and autonomously cool superconducting qubits to record-low temperatures. The quantum refrigerator is described in an article in Nature Physics journal.

“The quantum refrigerator is based on superconducting circuits and is powered by heat from the environment. It can cool the target qubit to 22 millikelvin, without external control. This paves the way for more reliable and error-free quantum computations that require less hardware overload,” says Aamir Ali, lead author of the study. “With this method, we were able to increase the qubit’s probability to be in the ground state before computation to 99,97%, which is significantly better than what previous techniques could achieve, that is between 99,80% and 99,92%. This might seem like a small difference, but when performing multiple computations, it compounds into a major performance boost in the efficiency of quantum computers.”

Powered naturally by the environment

The refrigerator utilises interactions between different qubits, specifically between the target qubit to be cooled and the two quantum bits used for cooling. Next to one of the qubits, a warm environment is engineered to serve as a hot thermal bath. The hot thermal bath gives energy to one of the quantum refrigerator’s superconducting qubits and powers the quantum refrigerator.

“Energy from the thermal environment, channelled through one of the quantum refrigerator’s two qubits, pumps heat from the target qubit into the quantum refrigerator’s second qubit, which is cold. That cold qubit is thermalised to a cold environment into which the target qubit’s heat is ultimately dumped,” says Nicole Yunger Halpern, NIST physicist and adjunct assistant professor of physics and IPST at the University of Maryland, USA. The system is autonomous in that once it is started, it operates without external control and is powered by the heat that naturally arises from the temperature difference between two thermal baths.

“Our work is the first demonstration of an autonomous quantum thermal machine executing a practically useful task. We originally intended this experiment as a proof of concept, so we were pleasantly surprised when we found out that the performance of the machine surpasses all existing reset protocols in cooling down the qubit to record-low temperatures,” says Simone Gasparinetti, associate professor at Chalmers University of Technology and lead author of the study.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

AI data centres, nature and innovation
Schneider Electric South Africa IT in Manufacturing
Artificial intelligence is driving unprecedented demand for data centre capacity, with liquid cooling now central to managing the heat generated by high-density GPU clusters. Schneider Electric examines how next-generation data centres can balance performance with environmental responsibility.

Read more...
Siemens powers next-generation reusable spacecraft development
Siemens South Africa IT in Manufacturing
A European aerospace startup focused on reusable space systems, has adopted Siemens Xcelerator software to connect engineering disciplines, reduce rework and accelerate spacecraft development, cutting the path from concept to flight hardware to nine months for its orbital demonstration capsule.

Read more...
How to navigate the high-stakes economics of AI infrastructure
IT in Manufacturing
Nearly 60% of data centre operators are expected to adopt liquid cooling within five years as AI workloads drive demand for higher rack densities. Understanding the full financial picture of liquid cooling, from capital investment to long-term operational savings, is now essential.

Read more...
Protecting the digital mine
RJ Connect IT in Manufacturing
As mining becomes increasingly connected and automated, cyber threats are emerging alongside the benefits of digitalisation. RJ Connect and provides rugged networking, edge computing and cybersecurity technologies from MOXA to help protect critical mining operations from evolving attacks.

Read more...
SICK launches AI-powered 3D quality inspection
SICK Automation Southern Africa IT in Manufacturing
SICK has combined deep learning with 3D height data analysis in its Nova machine vision platform.

Read more...
Predictive maintenance is the critical enabler for AI data centre liquid cooling systems
IT in Manufacturing
As liquid cooling becomes essential for AI data centres, predictive and condition-based maintenance are emerging as critical enablers of thermal stability. Schneider Electric argues that the infrastructure is already generating the data needed and the question is whether operators are equipped to use it.

Read more...
Siemens software scales with Simple Energy EV development
Siemens South Africa IT in Manufacturing
: Simple Energy, an Indian electric two-wheeler manufacturer, has expanded its use of Siemens Xcelerator software to manage complex vehicle variants and enterprise-level bills of materials, accelerating product development as its EV portfolio scales.

Read more...
ESG as a growth lever
RS South Africa IT in Manufacturing
Leading organisations are treating ESG not as a compliance obligation but as a practical tool for operational efficiency, supply chain resilience and business performance, with data and collaboration central to unlocking its value.

Read more...
Preparing Africa’s data centres for the demands of autonomous AI
Schneider Electric South Africa IT in Manufacturing
Africa’s data centre infrastructure must evolve significantly to support agentic AI workloads, with GPU-intensive computing, advanced cooling and reliable power demanding a fundamentally different approach to facility design and investment.

Read more...
Virtualising the control room to reshape building management systems
Schneider Electric South Africa IT in Manufacturing
Schneider Electric explains how virtualising building management systems frees facilities teams from ageing hardware, delivers stronger cybersecurity and enables portfolio-wide control from a single interface.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved