The new AX1000 from Beckhoff is a highly optimised servo drive that is fully integrated into the TwinCAT system. Despite its extremely compact design, it offers features that are similar to those of the larger drives of the AX series.
It offers an economical solution, without compromising on the highest technological standards. It is available in two different versions: one for the low-power range with a single-phase supply of 1 x 230 V AC, and one for the higher power range with a three-phase supply of 3 x 400 V AC, for currents ranging from 1,65 to 6,9 A.
Despite its compact dimensions, the AX1000 still manages to incorporate an integrated control power supply, DC link capacitors, a ballast circuit, and – in most variants – a ballast resistor. The control voltage is generated by the integrated power supply from the DC link. Both models are available as single-axis and dual-axis modules. Supported motor types include the AM8000 synchronous servomotors with One Cable Technology (OCT), in addition to asynchronous and reluctance motors, with or without feedback.
The AX1000 servo drive is fully integrated into the TwinCAT system via EtherCAT, providing the familiar convenience for commissioning, operation and diagnostics. All tools available for the larger AX5000 and AX8000 drives, such as TwinCAT Drive Manager 2, Autotuning, Bode Plot and cogging compensation, can also be used with the AX1000 servo drive.
Novel bearing steel next generation of aeroengines SKF South Africa
Motion Control & Drives
SKF continues to re-imagine intelligent and clean rotation with the development of an innovative temperature-resistant, corrosion-tolerant steel called ARCTIC15 designed for aeroengine bearings.
Read more...Products from maxon
Motion Control & Drives
A wide range of new products is available from motion control specialist, maxon. with a diverse technology portfolio ranging from highly integrated robotic actuators to powerful servo drives and controllers.
Read more...Actuators for precise hexapod movements
Motion Control & Drives
Aerotech, manufacturer of high-performance motion control and automation systems, is expanding its Automation1 platform. These compact hexapod devices enable the complete integration of six-axis motion systems into existing control
Read more...PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...Precision meets performance: The ELGD Axes Family from Festo Festo South Africa
Motion Control & Drives
Festo has introduced the ELGD axes family, engineered for the demands of future-focused industries. With cutting-edge guide technology, exceptional rigidity and high load capacity, these axes deliver more performance within the same installation footprint.
Read more...Condition monitoring in hazardous areas SKF South Africa
Motion Control & Drives
SKF is further strengthening its condition monitoring offer portfolio by a newly developed hazardous area version of its Microlog Analyzer dBX portable vibration analyser.
Read more...Rip-and-ship solution speeds up nuclear decommissioning project
Motion Control & Drives
When removing steam generators from decommissioned nuclear reactor buildings, the most economical method is to remove them in one piece. Mammoet was commissioned by Framatome to support with the removal of four steam generators from PreussenElektra’s Nuclear Power Plant Unterweser in Germany.
Read more...WearCheck turns the focus on friction modifiers Wearcheck
Motion Control & Drives
One of the most important features of a lubricant is the reduction of friction between two surfaces.A dditives like friction modifiers are added to perform this function. Wearcheck turns the focus on friction modifiers
Read more...SEW-EURODRIVE transforms drivetrain uptime SEW-EURODRIVE
Editor's Choice Motion Control & Drives
The DriveRadar IoT Suite from SEW-Eurodrive is an ideal solution for industrial condition monitoring. This powerful ecosystem of intelligent sensors, edge devices and cloud-based analytics ensures that customers have full visibility and control of their operations.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version