Electrical Power & Protection


Energising South Africa

August 2024 Electrical Power & Protection

With South Africa facing a critical juncture in its energy transition – needing to meet rising demand while reducing emissions – energy storage is key, promising stable grids and integrating renewables. However, when discussing South Africa’s energy transition and the role of energy storage, it is crucial to differentiate between two distinct segments – in-front-of-the-meter systems and behind-the-meter systems. These segments have different timelines, approaches and resource pools, but both are equally important for the country’s transition.

Behind-the-meter (BTM) systems are typically smaller and usually fall into the private sector space such as residential, commercial, and industrial systems. These systems are quicker and easier (although still complex) to install, and could have a faster impact on South Africa’s transition. This impact of distributed systems has already been seen over the past three years with the proliferation of solar PV installations, mainly by small businesses and residential users.

In-front-of-the-meter (FTM) systems are bigger utility-scale projects that will be driven by Eskom or other power utilities, or independent power producers (IPPs) and Eskom. These are typically long-term projects and solutions that could take four to six years or more to complete.

While both are crucial to South Africa’s energy transition, behind-the-meter solutions provide immediate relief to the country’s energy constraints. In-front-of-the-meter projects are key to meeting actual energy transition targets and reducing emissions. These are typically large sustainable projects that will enhance the larger grid infrastructure utilisation, and ultimately assist to reduce the reliance on coal power stations.

Energy goals

Energy storage is considered crucial for South Africa’s energy goals, particularly in ensuring stable grids and integrating renewables. This is because, while the country has great renewable energy sources, the problem is its load profile that does not align with the renewable energy generation profile.

Hence, we need energy storage solutions to store energy during peak generation time, when there is lower demand. Excess energy produced during peak generation periods should be stored in energy storage systems and dispatched during high-demand periods, which will ensure a more efficient energy network.

Yet, this is where we have a problem in South Africa because in areas of the highest solar irradiance, where solar PV projects are most economical, we have grid capacity constraints and a lack of energy storage solutions. Currently, projects are underway to implement large battery energy storage systems in strategic locations, so that excess energy is not lost; but these projects take time.

To have a sustainable electricity network, energy storage is a crucial part of the system. While technology is likely to evolve and change in the future, there must be some sort of storage system as part of the long-term solution for the country’s energy transition.

Unfortunately, various factors have contributed to the slow adoption of energy storage in South Africa. With the rapid advancement of technology over the past few years, it has been difficult for investors to align with and invest in a specific technology and solution for local production, without knowing whether it will still be viable in a few years. The lack of a sufficient regulatory framework also added uncertainties to the industry.

It’s not just about loadshedding

Loadshedding has forced the country to transition very quickly to accepting energy storage solutions in behind-the-meter applications. However, it has been a far harder sell when it comes to commercial and industrial consumers because, depending on the type of load and the number of hours of backup they need, the return on investment can be between five and eight years, with solar PV included.

Encouragingly, people are starting to understand all the benefits of energy storage. Along with the maturity of solutions and the energy environment, various measures can be implemented to accelerate energy storage adoption in South Africa. For example, a significant driver is the tax relief provided through Section 12B of the Income Tax Act, which offers favourable tax incentives to consumers that invest in renewable energy, specifically for systems coupled to solar PV installations. It will be beneficial if this relief is extended past the date of 28 February 2025, and is expanded to include battery energy storage systems with or without being coupled to solar PV systems.

Additionally, proper financial structures and frameworks should be developed by all utilities for selling excess energy back into the grid. From a residential, commercial, and industrial point of view, this would also make the adoption of energy storage solutions a lot easier. Finally, energy wheeling and trading through municipal infrastructure, some of which already have proper fee structures and frameworks in place, could be implemented.

Other than merely sidestepping loadshedding, there are many other benefits to energy storage solutions, which people should understand and use to make informed decisions. Users should get an experienced partner that is qualified to provide them with the best advice and technical solutions for their specific needs.

For more information contact ACTOM, +27 10 136 0216, mamiki.matlawa@actom.co.za, www.actom.co.za


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Power supply with scalability optimised
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has introduced the Easy UPS 3-Phase Modular to the South African marketplace. This robust uninterruptible power supply (UPS) is designed to protect critical loads while offering third-party verified Live Swap functionality.

Read more...
Prioritising arc flash safety
Comtest Electrical Power & Protection
Comtest has developed a range of thermal imaging and wireless testing tools from Fluke, designed to ensure safety is the top priority for engineers working in potentially dangerous arc flash zones.

Read more...
Minimal maintenance for dry-type transformers
Electrical Power & Protection
With minimal levels of maintenance needed, dry-type transformers offer reliable performance over lengthy lifespans, with few of the risks and hazards associated with oil cooled transformers.

Read more...
Electrifying the future
Parker Hannifin - Sales Company South Africa Electrical Power & Protection
A revolution is underway, transforming the way we power compact construction machines and heavy-duty mobile machinery. This is the electrification of equipment, a movement propelled by the need for environmental sustainability, lower emissions, reduced noise levels, and the pursuit of a cleaner, greener future.

Read more...
Your trusted partner in the mining industry
RS South Africa Electrical Power & Protection
The mining industry is facing significant challenges, from financial pressures leading to reduced margins, and demanding stakeholders adding to procurement costs. RS South Africa stands as the ideal partner to help businesses in the mining sector achieve their goals, while saving time and money.

Read more...
How to test for continuity with a multimeter
Comtest Electrical Power & Protection
Understanding the role of a continuity tester in electrical diagnostics is crucial for professionals and enthusiasts alike. This guide offers a step-by-step approach to using a digital multimeter as a continuity tester, ensuring precise and safe measurements.

Read more...
Wheeling is a secret weapon for industry
Electrical Power & Protection
While the lights have stayed on after the national elections, businesses across the board are paying close to 34% more for their power than they did two years ago. Brandon Horn, head of Commercial at SolarAfrica, cautions that these increases are not likely to change any time soon, and highlights the benefits of wheeling for a brighter bottom line.

Read more...
Load balancing can alleviate green taxes
Electrical Power & Protection
Whether it is the South African government’s recently signed carbon tax legislation, or the advent of green import taxes imposed by the EU, South Africa’s manufacturing sector faces considerable sustainability challenges.

Read more...
Industrial ecology for true sustainability
Electrical Power & Protection
Engineers have long drawn inspiration from nature. Examples of such biomimicry include passive ventilation systems modelled after termite mounds, and wind turbine blades with scalloped edges inspired by humpback whale flippers, which dramatically reduce drag. Now an emerging field is inspiring engineers to model industrial systems on nature’s elegantly designed cycles and systems.

Read more...
Schneider Electric launches new range of contactors
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its latest range of Easy TeSys contactors. This is an easy solution for OEMs, panel builders, contractors and system integrators who have a need for motor control, resistive load switching, and isolation applications.

Read more...