January 2024Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem. Foaming issues can be caused by oil levels that are both too high and too low. Insufficient oil could lead to the formation of a vortex inside the reservoir at the circulating pump’s inlet, drawing in air. If there is too much oil in the circulating system, it could result in oil coming into contact with a surface of the machine that it should not, which could result in slinging the oil, or churning it.
Sometimes, the amount of foam may prevent an oil-level reading being taken. While it is never advisable to insert any solid object into an oil reservoir without knowing its internal shape and size, you may be able to insert plastic tubing (clear) straight down to the bottom of the reservoir. Create a seal by covering the top of the tubing tightly, and extracting it – this should show the real oil level.
Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.
Read more...Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
Read more...Installation safety tester Vepac Electronics
Maintenance, Test & Measurement, Calibration
A combination measuring device for testing electrical installations, offering safety tests including RCD, voltage, loop, low-resistance, earth resistance and insulation checks via a 3,5-inch TFT colour display.
Read more...Vibration sensor with CANopen interface for mobile machines ifm - South Africa
Maintenance, Test & Measurement, Calibration
ifm’s 3-axis VMB301 condition monitoring sensor integrates into the vehicle network via CANopen, delivering real-time bearing, vibration and temperature data to help mobile machines avoid costly damage and downtime.
Read more...Linear regulated 2-channel laboratory power supply Vepac Electronics
Maintenance, Test & Measurement, Calibration
Vepac Electronics offers a dual-channel laboratory power supply built for safe, precise testing in laboratories and workshops.
Read more...When oil gets old Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck explains how oxidation breaks down lubricating oils over time, and how routine oil analysis can catch the warning signs before equipment failure.
Read more...SEW-EURODRIVE brings intelligent energy optimisation to Electra Mining SEW-EURODRIVE
Maintenance, Test & Measurement, Calibration
At Electra Mining Africa 2026, SEW-EURODRIVE will showcase its DriveRadar IoT platform for predictive maintenance and real-time energy optimisation, alongside plant energy surveys and an 1850 kW medium voltage motor display.
Read more...WearCheck demonstrates advanced condition monitoring at Electra Mining Wearcheck
News
Condition monitoring specialist WearCheck will demonstrate its used-oil analysis, fuel analysis, transformer chemistry and asset reliability services at Electra Mining Africa as the company marks 50 years of predictive maintenance expertise.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version