News


Mining houses can save big by using a standard safety induction model

November 2022 News

As one of the most dangerous industries in the world, it is for good reason that there are strict health and safety protocols in mining. Before starting work on any project for a mining house, every individual must complete the necessary health and safety induction at each mining site. Given the high headcount for contractors at any given site, this becomes complicated, costly and time-consuming.


Jared Kangisser.

The requirement that the induction process be repeated for each returning individual – often across multiple sites, on numerous occasions throughout the mine’s lifecycle – is simply not feasible. So, what is the solution to wasted time and induction costs? A single standard induction model that supports inter- and intra-company movements and eliminates induction duplication.

Unnecessarily repetitive

Although the rationale behind the mining site safety induction requirement is sound in theory, in practice, there is room to make it a lot more streamlined and efficient. Section 10 of the Mine Health and Safety Act, and the Occupational Health and Safety Act, regulate all mining activities and place a requirement on the employer to train an individual on the latest health and safety standards that apply to that mining site.

Each site is empowered to run its own induction processes, if it ensures that it has covered the correct health and safety training elements of these Acts to be deemed legally compliant. This covers elements of hazard identification and risk assessment on site, and how to perform their job safely in that environment. Having to repeat this induction upon arrival and return to every site is a waste of time, resources and money.

Unnecessary costs and delays

With each mine running its own induction programme, which can take between one and three days, efficiency takes strain when onboarding high volumes of workers, resulting in bottlenecks. Internal induction resources are stretched thin – classroom, administrator and facilitator resources are limited, which pushes out the lead time, which then impacts the time taken to get on site.

As a result, there is a direct cost and indirect cost implication to the mining house, but because these are not visible as a single line item on an income statement, mining companies don’t see the true cost impact of these delays. However, if a mining house takes on 2000 contractors a year, but each contractor takes an extra two days to get on site (at an assumed R1000 per day cost per contractor) that’s an extra R4 million per year simply in training expenses due to bottlenecks and inefficiency.

The solution is standardisation

80% of the safety induction is generic, to meet the legal requirements of the Acts. This means that it is ripe for standardisation. In the early 2000s, a unified induction and training centre was established in KwaZulu-Natal, comprising six different mining houses. Across these six mining houses, approximately 10 000 mining contractors migrated between five or six mines for several years, and before standardisation, contractors would need to redo the induction each time they arrived on site.

By standardising the legally required content into a world-class induction programme, it became possible for contractors to undergo a single induction, and upon passing the assessment they are issued with clearance valid for 12 months. This would then work in their favour for both inter- and intra-company movement, and contractors would not be required to repeat the induction to access any of the relevant sites that are party to the single-standard induction model. Any remaining on-site induction requirement is then significantly simplified and reduced, and efficiency increases exponentially. Induction thereafter needs to be refreshed only on an annual basis, which presents compelling cost- and time-saving opportunities.

Standardisation is the true foundation for zero harm

With the creation of a single standard for safety induction, this has benefits beyond health and safety training efficiency. There is also the potential for alignment and standardisation of health and safety within an organisation or across multiple organisations, which is important in embedding the critical message of zero harm across the industry. There is a tendency for contractors to feel that they’re just there to do a job, and health and safety regulations only slow them down. There is a misalignment between contractors and the site that they're working on, which is an area of huge concern.

Saving money, saving lives

Imagine every single contracting company and every single contracting employee taking the same induction course with the same principles, the same knowledge, and the same value system around safety, barring site-specific requirements. This is the real opportunity to truly achieve a culture of zero harm by effectively reducing fatal incidents.

This in turn has a positive impact on all stakeholders including government, mining houses, unions and ultimately the communities at large. Furthermore, a single standard of safety is the ideal foundation for reciprocity; not only from a cost-saving perspective, but toward alignment. By centralising inductions, legal compliance becomes easier, and through alignment, everyone is working at the same standard, toward the same safety goals.

Simply put, by streamlining and unifying their induction processes, mining houses that subscribe to a single standard of safety induction have collectively saved more than R1,5 billion in just over a decade. That’s a cost-saving worth pursuing, particularly in this economic climate, where mining houses are being forced to do more with less, without compromising on safety or quality.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
Schneider Electric again named World’s Most Sustainable Corporation
Schneider Electric South Africa News
Schneider Electric has been named the World’s Most Sustainable Corporation 2025 by Corporate Knights, and is the only company to rank first in the Global 100 twice.

Read more...
Epiroc and ABB collaborate on underground trolley solutions
News
Epiroc and ABB have signed a MoU based on underground trolley equipment to collaborate on joint, comprehensive and integrated electrification solutions for the mining industry to increase productivity and achieve decarbonisation targets.

Read more...
KITE 2025 addresses digitalisation of industrial manufacturing
News
As organisations come to terms with the adoption of digitalisation processes, it is important that they align themselves with suppliers of industrial technology and services that understand their exact requirements.

Read more...
Fuchs Lubricants sails strong into 2025
News
The successful completion of a major investment programme has significantly increased the growth potential of Fuchs Lubricants South Africa.

Read more...
WearCheck launches advanced thermography course
Wearcheck News
WearCheck recently launched a new training course, InfraFocus to upskill users of thermographic cameras. This highlights the best ways to capture thermographic imagery for use in a condition monitoring programme

Read more...
Appointments
Schneider Electric South Africa News
     

Read more...
Locally manufactured solutions for infrastructure development
ACTOM Electrical Machines News
Infrastructure plays a critical role in driving growth and economic development in South Africa, particularly through projects involving the country’s energy, logistics and water sectors.

Read more...
Bühler’s strategic upgrades advance world-class manufacturing excellence
News
2024 was pivotal for Bühler Johannesburg due to significant upgrades at its manufacturing facility to enhance efficiency, safety and the overall working environment.

Read more...
From the editor's desk: The future just got faster
Technews Publishing (SA Instrumentation & Control) News
When we took a look at quantum computing this time last year it seemed a bit like an idea for the future – more sci-fi than reality. Only a year later there have been huge breakthroughs in hardware, ...

Read more...