Motion Control & Drives


Danfoss efficiencies help South African farmers to free up energy and achieve production goals

October 2020 Motion Control & Drives

In recent years, South African energy security has been constrained, while the country is also recognised by the Development Bank of Southern Africa as being a water-scarce country. The importance of energy efficiency in assisting with adequate irrigation is of paramount importance.

Danfoss, together with engineering components provider BMG, an authorised DrivePro service partner of Danfoss, supplied a commercial maize farmer with the technology required to combat challenges around electricity sufficiency, for more effective irrigation purposes in order to increase production capacity. This initiative has since been followed by other commercial farmers in the wider area.


Sydney Govender, Country Lead Danfoss SA Drives.

The challenge

Sydney Govender, Danfoss country sales manager – Drives SSA, explains: “A joint Danfoss-BMG collaboration assisted a commercial maize farmer in Barkly West to tackle the hurdles posed by an inadequate energy supply, which could not be increased by other means. The region in which the farm is situated receives little rainfall throughout the year, making effective irrigation supremely important for successful crop yield.”

Mick Baugh, electronics manager, Electromechanical Division, BMG, adds: “Pumping and irrigation were the largest consumers of power on this maize-producing farm. The project required assisting the farmer, who was limited by a power supply of only 200 kVA, to reduce the cost of irrigation per hectare. Additionally, the farmer wanted to expand his crop production to include pecan nuts, but was unable to because of these limitations. The cost of irrigation per hectare therefore needed to be reduced, and the limited power supply needed to be used more efficiently.”


Mick Baugh, Electronics manager BMG.

At the outset of the project, one of the pump sets supplied five centre pivots and some orchards:

• The pump set consisted of 1 x 37 kW, 1 x 22 kW and 2 x 11 kW pumps.

• This equated to an installed power of 81 kW, with an absorbed power of 75 kW, which meant that the pump set drew a current of about 150 A.

• Additionally, the pumps were started by star/delta starters, and the only form of flow control was valves.

Installation of Danfoss VSDs on all pump sets

Govender clarifies: “In this case, the energy shortage was the farmer’s main concern, with costs being a secondary consideration. We were therefore looking to free up the existing electricity supply in order to use it elsewhere and thereby increase production capacity. The use of VSDs on a pump set was the perfect solution to provide the required benefits.”

The proposal was as follows:

• To install Danfoss VLT AQUA Drive FC 202 VSDs on all pumps.

• To control these pumps by means of pressure transducers set to match the varying demands of the different irrigation scenarios that presented themselves.

• To stop using the valves as a means to limit flow, as this was highly inefficient.

“Danfoss VLT AQUA Drive FC 202 VSDs, which offer additional energy savings when compared with most traditional variable speed controls, have been designed for water and wastewater applications, including irrigation,” a Danfoss spokesperson said. “These were fitted to all pumps in this installation and the only peripheral components required were the pressure transducers.”

Baugh adds: “There were a number of reasons why BMG chose these particular Danfoss solutions. For example, a notable feature of the Danfoss VLT AQUA Drive FC 202 is the inclusion of a soft start/stop facility, which prevents water hammer on starting and stopping the pumps, thus reducing the possibility of burst pipes. Wear and tear on couplings, pumps and pipes is also reduced. Furthermore, these drives are available in IP55 enclosures, which do not require dedicated panels for mounting, and this eliminates the need for the additional cooling and ventilation measures normally required to extract heat during operation.

“Finally, BMG, as an authorised Danfoss service partner, with accredited technical staff and an extensive spares stock holding, is able to offer farmers support all year round. With regards to DrivePro services, we stock a number of service exchange units and spare parts at the nearest BMG branch, in Kimberley.”

Results

After the installation of the drives and programming the set point to 2,8 bar, the Danfoss-BMG team were able to run this same pump set with an absorbed power of 51 kW, a saving of 24 kW or 50 A. It is noteworthy that the farmer began with a set of three drives on three pumps and, because of the energy saving, he eventually installed VSDs on every pump on his farm.

“At the last count,” says Baugh, “there were over 20 VSDs on the farm, with a projected annual power saving of 155 500 kW. After the installation of variable speed drives on all pump sets, the power supply is used more efficiently, resulting in improved crop production and expansion of the farmer’s supply of maize, which now also includes pecan nuts.

“The project was conducted under the umbrella of BMG’s Boer Slim/Smart-Farming agricultural initiative, which has been operating for some six years now, aiming to assist farmers throughout Southern Africa with the selection, installation and operation of new electromechanical systems. These projects are designed to improve efficiencies, reduce energy consumption and minimise maintenance requirements.”

Showcasing an additional practical application of this methodology

In another project that operated along similar lines, Danfoss and BMG assisted a tobacco farmer who wanted to accelerate his tobacco drying process and expand crop production, but who was also restricted by power supply limitations. After the installation of Danfoss electronic VSDs, this farmer was able to run 22 tobacco drying containers at once, where previously he could only run and alternate between nine. As a result, the farmer has more than doubled his crop production output. Further, there are no more noticeable voltage dips when the process starts, up and wear and tear on mechanical components is reduced. Production is also now less labour-intensive, which additionally reduces costs.

Conclusion

Govender notes: “Maize is South Africa’s most important field crop, being both a staple food for many of its citizens, as well as making a significant contribution to the economy. At the same time, the country’s maize exports are generally inconsistent due to uneven surplus levels from one year to the next. To compete more effectively in global markets, South Africa has to reduce its logistics and production costs. This, however, is difficult while the country’s power grid remains constrained at the macroeconomic level.

“The featured Danfoss/BMG initiatives provide an illustration of how assisting two farmers has helped to free up energy, which was then channelled elsewhere in order to increase productivity. This assists individual farmers, while simultaneously allowing them to play an incremental role in improving the macroeconomics of the country, while the electricity supply continues to be constrained.”




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

WEBER-HYDRAULIK modernises warehouse in record time
Motion Control & Drives
WEBER-HYDRAULIK is a leading international specialist in customised hydraulic solutions. After its old buffer warehouse had become outdated and was partially worn out mechanically, the decision was made to completely renovate it.

Read more...
OMC deploys cobots to improve throughput ten times
Motion Control & Drives
OMC, a pioneer in optoelectronics design and manufacture, is investing to introduce innovative cobot technology onto its fibre optic production line.

Read more...
Yaskawa Southern Africa launches laser welding cell
Yaskawa Southern Africa Motion Control & Drives
Yaskawa Southern Africa has partnered with Industrial Manufacturing Systems South Africa to introduce the Megmeet laser welding cell, a breakthrough solution combining precision robotics with cutting-edge laser technology.

Read more...
Next-gen planetary gearboxes
SEW-EURODRIVE Motion Control & Drives
Leading the way in planetary gear unit innovation, SEW-EURODRIVE is extending its reach across a growing range of industries, delivering the advantages of this powerful technology through locally engineered solutions that ensure faster lead times.

Read more...
Record-breaking dragline relocation
Motion Control & Drives
Draglines are key pieces of equipment in open-pit mining. BHP Mitsubishi Alliance entrusted Mammoet with the relocation of a 3100 ton Marion 8050 dragline from one end of the Peak Downs coal mine in Queensland, Australia to another, a full 27 km away.

Read more...
igus expands 3D printing capabilities
igus Motion Control & Drives
Motion plastics specialist, igus South Africa has introduced a new 3D printing service capable of producing custom parts in two engineering-grade polymers with exceptional strength and without the need for lubrication.

Read more...
Bühler adds new die refurbishment machine
Motion Control & Drives
Bühler has reinforced its commitment to customers in southern Africa with the installation of a new die refurbishment machine at its Johannesburg workshop.

Read more...
SEW-EURODRIVE drives innovation at automotive plant
SEW-EURODRIVE Motion Control & Drives
[Sponsored] A major automotive manufacturer in Gauteng has boosted its operational efficiency, safety and energy savings with the installation of SEW-EURODRIVE’s advanced MOVIGEAR mechatronic drive system in its newly expanded buffering zone.

Read more...
Reimagining rotation for a circular and sustainable future
SKF South Africa Motion Control & Drives
Through the design and manufacture of components with sustainability at their core, SKF is reimagining the future of rotation, rolling away from traditional, consumable-based thinking toward a smarter, more sustainable circular approach.”

Read more...
Optimising operational efficiencies through advanced filtration systems
Bearing Man Group t/a BMG Motion Control & Drives
Filtration is the only effective defense against wear and tear when contaminants are present. It is therefore critical that effective filter components are correctly used to ensure dependable performance, high efficiency and extended service life of machinery and vehicles.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved