Whether in exhaust systems, pumps or compressors, motors of various sizes are used in production plants and warehouses, quite often in remote locations. Maintaining machines is therefore time-consuming and prone to errors, especially if maintenance personnel are only instructed to perform on-site inspections on an infrequent basis.
Instead, data from multiple motors can be collected, evaluated, centrally displayed and if necessary, linked to alarm actions in order to warn of impending failures in good time. Users can use radio technology to connect Turck’s QM42VT1 vibration and temperature sensor with the high-performance TX700 HMI device for this purpose.
Rugged sensor detects vibration and temperature values
Has the motor become loose, causing the shaft to be misaligned? Is a bearing jammed or is an attachment out of balance? Mechanical vibration can flag up issues such as these. The QM42VT1 vibration and temperature sensor detects vibrations with a high level of accuracy. For this purpose, the compact MEMS-based sensor (micro-electro-mechanical system) is simply mounted directly on the motor block via a magnetic holder. From there, it delivers speed and acceleration data over two dimensions in different frequency ranges. Changes in the measurement data can then be used to identify various forms of damage.
Measuring the temperature of the motors is also vital, as a significant increase in temperature could be an indication of wear or insufficient lubrication on a bearing. The IP67 sensor also detects such temperature changes within a measuring range of -40 to 105°C.
Data transfer and visualisation
Maintenance personnel can wire the vibration and temperature sensor to the battery-powered DX80 radio module. The measured values are then sent to the receiver module of the DX80 system via a proprietary wireless network.
All engine status data can be clearly displayed on Turck’s HMI/PLC TX700. In addition, users can read out historical trends, extract log data or configure alarms such as automatic email notifications. Ethernet connection is also possible, allowing data to be queried through the entire company.
With this stand-alone solution, maintenance personnel can view the status data of all machines, whether on-site, at the HMI, or on company networked computers.
Clog-resistant nozzle for powerful
Maintenance, Test & Measurement, Calibration
As EXAIR and BETE continue to build on a strong partnership, EXAIR has recently added a selection of BETE products to the site, including the innovative BETE HydroClaw tank and vessel cleaning nozzle.
Read more...Why your next oscilloscope should Comtest
Maintenance, Test & Measurement, Calibration
The PC-based USB oscilloscope is a cutting-edge, adaptable alternative to traditional benchtop oscilloscopes that’s redefining test and measurement.
Read more...Energy measurement module for BL20 I/O System Turck Banner Southern Africa
Electrical Power & Protection
Turck’s BL20 energy measurement module enables precise monitoring of the energy consumption of single- or three-phase systems.
Read more...Automated test and measurement Comtest
Maintenance, Test & Measurement, Calibration
Comtest, in partnership with global brands, provides customised solutions with integrated hardware and software for efficient testing and data collection.
Read more...Status display for conveying sensor, machine and device data Turck Banner Southern Africa
Operator Interfaces, Switches & Relays
Enhance application accuracy and efficiency with the SD50 Status Display, which conveys sensor, machine and device data via text and multicolour LEDs.
Read more...Advanced field calibrator and communicator
Maintenance, Test & Measurement, Calibration
The Beamex MC6 is a high-accuracy field calibrator that offers automatic calibration capabilities for pressure, temperature and various electrical signals.
Read more...Inductive IO-Link sensors Turck Banner Southern Africa
Sensors & Transducers
Turck Banner is expanding its sensor range, with inductive measuring sensors with IO-Link and an analogue output for flush and non-flush mounting.
Read more...Inline particle measurement Mecosa
Maintenance, Test & Measurement, Calibration
Part of the SOPAT family, Parsum has for more than 20 years stood for the measurement of particles in a running process - without sampling and without a laboratory.
Read more...Inline analysis measurement technology Mecosa
Maintenance, Test & Measurement, Calibration
SOPAT develops and sells a photo-optical and image-based inline analysis measurement technology that quantitatively characterises particulate multi-phase systems. The software provides real-time analysis of particle size distribution.
Read more...UV water treatment system
Maintenance, Test & Measurement, Calibration
bestUV is an innovative manufacturer of professional ultraviolet (UV) water treatment systems for industrial markets.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.