News


From the editor's desk: Should we put everything online?

April 2017 News

‘Connectivity is good’ is the fundamental premise that underpins the IIoT and the ideas of the fourth industrial revolution. There is now enough data to verify that interconnected industrial networks can bring about significant increases in operational efficiency, particularly in the areas of supply chain optimisation and overall equipment effectiveness. The catch is that these same interconnected networks expose the organisations that rely on them to cyber security vulnerabilities on a scale that was just unimaginable before. And to make matters worse, these threats now extend right down to the process control level.

Cyber-informed engineering

Paradoxically, what makes the control systems vulnerable is the very thing that end users demand from them – configurability. The Stuxnet attack on the nuclear enrichment facilities, believed to have been part of Iran’s nuclear weapons programme, is a prime example https://tinyurl.com/m9rbqd3.

As the level of interconnectedness permeates further down the organisation towards the process level, so the threat of a disruptive cyber attack evolves. However, this does not mean that a state-of-the-art pharmaceutical factory, for instance, faces the same level or type of threat as say the national power distribution grid. Even though both may make use of similar smart technologies, perhaps even from the same supplier, one is a commercial manufacturing operation and the other is a strategic national asset.

What it does mean is that while cyber security must now be considered as part of any overall enterprise risk management strategy, the nature and tactics of the cyber preparedness required will vary from organisation to organisation.

In the case of the manufacturer, protecting the plant from a disgruntled employee determined to ruin a production batch, or a competitor trying to get its hands on strategic process-related information, may be the priority. While in the case of the national power grid, the threat may come from a rival nation in retaliation to a military invasion, or even as a response to economic sanctions.

Just how seriously is the threat being taken? We get an inkling from this year’s ARC Industry Forum in Orlando, where one of the keynote speakers was Marty Edwards, the director of Industrial Control Systems, Cyber Emergency Response Team at the US Department of Homeland Security.

Boiled right down, his message was simply: “At the end of the day, a capable and determined nation state could breach any system. Therefore, it is important to perform a thorough and detailed risk assessment to identify the one or two critical functions in the plant, and then apply particular protection to those areas.”

Or, in cyber-informed engineering parlance, once you have identified those functions that are vital to your organisation, take them offline. (See more in Paul Miller’s review of the conference in ‘ARC Advisory Group Industry Forum’.)

Industry guide

Posted with the magazine this month is the 2017 edition of the Technews Industry Guide: Maintenance, Reliability &c Asset Optimisation. The intent of this publication is to arm the modern maintenance professional with a one-stop definitive resource that covers everything from in situ sensor-based solutions for condition monitoring, through handheld portable devices for periodic maintenance-related checks, through software solutions for analysis and reporting, and on to customised services like reliability management consulting and training. Our hope is that the ideas and insight we have gathered could help to solve a problem that you may be struggling with in your own particular plant.

In closure, congratulations to Oratile Sematle who has been elected to serve a second year as president of the SAIMC – keep up the good work Oratile!

Steven Meyer

Editor: SA Instrumentation & Control

[email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
A strategic milestone for Conical Technologies
Conical Technologies News
Conical Technologies has been appointed as the sole distributor in southern Africa for Mibbo, manufacturers of a vast array of products for the automation industry.

Read more...
Robotics TechTalk at UKZN
News
The Scientific Multidisciplinary Advanced Research Technology Lab at the University of KwaZulu-Natal recently held an exciting TechTalk. It was an opportunity to introduce students to the IEEE Robotics and Automation chapter, SAIMC, and the Robotics Association of South Africa.

Read more...
Top laboratory industry trends in the spotlight at analytica Lab Africa 2025
News
The future of laboratories and transformative diagnostic technologies will come under the spotlight in July at analytica Lab Africa, South Africa’s only trade fair for laboratory technology, analysis, biotechnology and diagnostics.

Read more...
Schneider Electric honoured with Gender Leader Award
Schneider Electric South Africa News
Schneider Electric has been awarded the Gender Leader Award at this year’s Africa CEO Forum. This award acknowledges those organisations operating in Africa that have shown a significant and continuous commitment to gender diversity and inclusion.

Read more...
Africa Automation Technology Fair 2025 closes on a high note
News
The Africa Automation Technology Fair 2025 officially wrapped up after three dynamic days at Gallagher Convention Centre, cementing its status as Africa’s leading platform for industrial automation, AI and IoT.

Read more...
A new generation of solar professionals
News
A new generation of solar professionals is rising in Cape Town. The second cohort of the Solar Youth Project has just completed an intensive eight-week training course and is ready to take on the next stage, 10 months of work experience.

Read more...
From the editor's desk: The age of superintelligence
Technews Publishing (SA Instrumentation & Control) News
      In this issue of SA Instrumentation & Control we say farewell to our longstanding contributing editor, Michael Brown, who is retiring soon. His outstanding contribution over the years in the field of ...

Read more...
SAIMC: Sunshine, swings and smiles: Durban Golf Day hits a high note
Technews Publishing (SA Instrumentation & Control) SAIMC
We say it every year, and we’ll say it again: May in Durban is hard to beat; but 9 May, when the Durban Golf Day teed off at Kloof Country Club, was something else. With sunny skies and temperatures in the upper 20s, it was a fantastic day, full of fun and great energy.

Read more...
Driving digital transformation in the new wave
SAIMC Supplier Advisory Council News
The latest presentation in the series ‘Knowledge Sharing 4 Industry’ will be held on Wednesday 25 June. It will be presented by Johan Potgieter, Cluster Industrial Software Leader for Schneider Electric, South Africa.

Read more...