SAIMC


SAIMC: Durban branch

September 2014 SAIMC

The Durban branch hosted Paulo de Sousa Gomes from Schneider Electric at its August Technology Evening held at the Durban Country Club. Paulo introduced the attentive audience to the ‘Shale Gas Revolution’ and the interest in the topic was evident from the large number of members and guests in attendance.

Howard Lister (right) thanks Paulo after the presentation.
Howard Lister (right) thanks Paulo after the presentation.

Paulo began by explaining the geological aspects of shale gas and shale oil storage.

Shale gas is natural gas, predominantly methane, which is found trapped within the shale layer formations found approximately two thousand metres underground. It has become an increasingly important source of natural gas in the United States since the start of this century, where it has transformed the economics due to the high profit margin available from the exported fuels. Interest has now spread to potential gas shale in the rest of the world with the area of particular relevance to South Africa being the Karoo basin. Data collected by the Energy Information Administration agency of the United States indicates South Africa as the eighth largest potential shale gas producer in terms of reserves. This is a possible game changer for South Africa which could transform our energy landscape, but it has also sparked widespread debate because of fear of contamination of the underground water supply.

The method used to mine shale gas is a process commonly called fracking. Induced hydraulic fracturing is a technique in which a liquid (in most cases water) is mixed with sand and chemicals and the resultant mixture is injected at high pressure into a wellbore. This creates small fractures in the deep rock formations along which gas, petroleum and brine migrate to the well. When hydraulic pressure is removed from the well, the small grains of proppant (sand or aluminium oxide) hold these fractures open as the rock achieves equilibrium.

Paulo explained that a key to efficient extraction is the use of horizontal drilling which enables the shale to be exploited over relatively long distances and in a variety of directions. He went on to discuss the automation and processes involved which require monitoring the vast quantity of information and managing the process to ensure optimum production while protecting the environment. Configuring the control and management system is a huge undertaking, so Schneider has come up with a ‘Shale Gas Factory’ approach for easy self configuration.

At the conclusion, there were many questions from the floor with several interesting points raised. Discussions about the economic benefits versus the potential for possible environmental damage continued over the delicious Durban Country Club dinner long after the formal closure of the meeting.

It was a highly successful evening at which several students from the Mangosuthu University of Technology attended for the first time and we hope that they will be able to attend regularly in future.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SAIMC’s May 2026 KS4I event to spotlight AI-driven industrial automation
SAIMC SAIMC
SAIMC’s May 2026 KS4I event will focus on practical and forward-looking approaches to AI-enabled automation and intelligent industrial connectivity.

Read more...
SAIMC: From the office of the COO
SAIMC SAIMC
We are failing young engineers - not just in classrooms, but as a society.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
Jenine Jansen van Vuuren from Comtest delivered a presentation at the SAIMC Johannesburg technology evening, focusing on electric vehicle charging stations and the key metrics that govern their functionality.

Read more...
SAIMC: Durban branch
SAIMC SAIMC
At the monthly meeting of the Durban branch of the SAIMC, Smunye Memela, project manager and switch gear specialist at Gubhuza 3 Trading presented on the subject ‘From sensors to insights: predictive maintenance in action’.

Read more...
SAIMC’s May 2026 KS4I event to spotlight AI-driven industrial automation
SAIMC
SAIMC’s May KS4I event will focus on practical and forward-looking approaches to AI-enabled automation and intelligent industrial connectivity.

Read more...
SAIMC presents knowledge-sharing session on predictive maintenance
SAIMC
SAIMC is presenting another upcoming knowledge-sharing event as part of its Knowledge Sharing for Industry (KS4I) series, aimed at advancing technical insight and collaboration across the engineering sector.

Read more...
SAIMC knowledge sharing event
SAIMC SAIMC
SAIMC will host a technical knowledge-sharing session by Hendrik Spies from SICK Sensor Intelligence, who will share his insights into ‘From Condition Monitoring to Predictive Maintenance: The Digital Journey’.

Read more...
SAIMC Durban
SAIMC
: At the SAIMC Durban monthly meeting, James Adams from Adroit Technologies presented to a full house on the subject of ‘The intelligent factory: AI, digital twins, zero-defect production, and cybersecurity in modern automotive manufacturing’.

Read more...
SAIMC: From the office of the CEO
SAIMC SAIMC
AI has become part of our productivity platforms, our operations and our decision making environments. The SAIMC NPC Power Hour series is one such initiative.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
The March SAIMC Johannesburg technology event was proudly hosted by Matech and focused on business intelligence made simple.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved