IT in Manufacturing


South Africa’s AI push is running ahead of its digital foundations

July 2026 IT in Manufacturing

Consider this: you lead a large retail business, and six months ago, you approved a significant generative AI investment to personalise customer promotions. The business case was compelling, the pilot results were strong and the board supported the move. The tool is now live, but it is operating at a fraction of its intended capacity, reaching only part of the target customer base and already exceeding its original cost projections.


Kgomotso Lebele, country managing director for Accenture, South Africa.

Your chief technology officer assures you the AI is performing as designed. They are right. The technology performed as intended, but the foundations beneath it let it down: a decade-old inventory system never built for real-time data exchange, pricing data siloed across business units and fragmented customer histories across legacy databases.

You approved the AI. Nobody flagged the foundations. This is no longer hypothetical, it is playing out across South African enterprises investing heavily in digital transformation.

The value gap nobody is talking about

More than 80% of South African enterprises increased ICT budgets in recent years. IT spend grew by 11% between 2022 and 2025, with AI investment rising by 80% over the same period. Business performance has not kept pace and revenue growth across sectors is subdued.

This divergence points to a widening gap between technology investment and business outcomes. Accenture’s analysis shows that by 2025, technology spend had outpaced revenue growth by roughly 115 percentage points, investment accelerating faster than the value it is meant to create. The explanation is uncomfortable. Many organisations are deploying sophisticated technologies on foundations that were never designed to support them.

Why leaders aren’t acting on it

Accenture’s research shows that 89% of South African executives acknowledge that legacy infrastructure limits their agility and contributes to growing technical debt. Only 24% are actively addressing it. The underlying work of building those foundations, modernising data architectures, integrating core systems, resolving technical debt, is slower, less visible and often treated as operational spend rather than strategic investment.

The result is predictable; organisations optimise for what can be seen and measured in the short term, while underinvesting in what determines whether those initiatives scale. As a result, they prioritise short-term visibility over long-term scalability.

What the evidence shows when the foundation is right

Where foundations are strong, the results are clear. One of the largest retail banks by customer base in South Africa has built its model on a digital foundation designed for simplicity and scale. By late 2024, it had reached 23 million clients, with more than half actively using its app. Digital and card payments grew 24%, while headline earnings increased 36% for the half-year in 2024. Its cost-to-income ratio of approximately 37% and return on equity of 29% reflect a business built for efficiency.

A similar pattern is evident in a local digital bank built on a cloud-native architecture, which reached 10 million customers in under six years and achieved profitability ahead of schedule. These organisations did not outperform because they invested more in AI, they outperformed because they built the conditions that allow AI, and every other technology, to deliver lasting results.

The paradox hiding in plain sight

AI is not just underperforming on weak foundations; it is actively making them weaker. Every temporary integration, workaround and model trained on inconsistent data introduces complexity that persists. Accenture’s research shows that AI and enterprise applications are now among the largest contributors to technical debt in complex organisations, with managing that debt consuming between 20% and 40% of IT budgets.

The challenge is that debt accumulates through success. A pilot works, results are strong and the board approves expansion. Scaling, however, either requires rebuilding properly or accepting inherited fragility. Most organisations choose the latter. AI debt is harder to see than traditional technical debt; it hides behind working pilots and only surfaces when scaling fails, by which point organisations are already committing the next round of investment.

Three disciplines that cannot be delegated

Accenture’s research identifies three disciplines required to build a reinvention-ready digital core, spanning cloud, data and AI, platforms, security and applications, all requiring direct leadership attention.

The first is building for industry, not a generic template. Infrastructure growth alone does not translate into value. A bank running legacy systems faces different constraints from a mining company operating in low-connectivity environments. Competitive advantage comes from identifying which capabilities matter most in context.

The second is treating innovation investment as a compounding discipline. Organisations that consistently increase innovation spend build momentum. Organisations that hold it flat, particularly under pressure, do not stand still; they fall behind. A 6% annual increase is emerging as a threshold for maintaining competitiveness.

The third is managing technical debt as a strategic asset. Around 15% of IT spend is emerging as a critical balance point. Below this, complexity compounds and limits scale. Above it, investment is absorbed by fixing the past, delaying new growth.

The question leaders need to ask

AI investment is accelerating across South Africa. The constraint is no longer access to technology; it is the ability to support it at scale. Foundations are not a technical detail to be addressed later, they determine whether investment translates into performance. Organisations pulling ahead are building the structural conditions for sustained value.

The question is no longer whether to invest in AI, it is whether the business is built to extract value from it. AI will not fail South African companies, weak foundations will. Quietly at first, then all at once, turning promise into cost when it is far harder, and far more expensive, to fix.

For more information contact Jonathan Mahapa, Accenture South Africa, + 27 11 208 3947, [email protected], www.accenture.com




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Africa on the edge of a digital future
Schneider Electric South Africa IT in Manufacturing
Edge computing promises lower latency, stronger reliability and real-time responsiveness across Africa, yet its rollout keeps colliding with one stubborn obstacle, power. Steven Santini explores how renewable microgrids, smart energy management and the right partnerships could turn the continent’s energy gap into its biggest edge opportunity.

Read more...
3D electrical systems design workflow for electromechanical innovation
Siemens South Africa Fieldbus & Industrial Networking IT in Manufacturing
Siemens has announced new 3D electrical design capabilities within its Capital software, enabling electrical and mechanical engineers to work concurrently in a shared 3D environment to reduce late-stage design changes and accelerate time to market for complex electromechanical products.

Read more...
Optimising energy reliability for African manufacturing
Electrical Power & Protection IT in Manufacturing
Unreliable power can cost African manufacturers as much as 31% in sales. Behind-the-meter power offers manufacturers in sub-Saharan Africa control, visibility and resilience in their energy provisioning.

Read more...
ISO 42001 helps organisations prepare for the realities of AI governance
IT in Manufacturing
A security specialist at Galix explains how a new international standard helps organisations build structured governance around their use of artificial intelligence.

Read more...
The digital twin advantage for infrastructure development
Schneider Electric South Africa IT in Manufacturing
Schneider Electric’s Johan Potgieter explains how digital twin technology and virtual commissioning can reduce the cost and risk of large infrastructure projects.

Read more...
Haddy scales AI-enabled adaptive microfactories with Siemens Xcelerator
IT in Manufacturing
Additive manufacturing company Haddy has deployed the Siemens Xcelerator platform across its network of AI-enabled microfactories, connecting design, planning and robotic production through a consistent digital thread to support local, circular manufacturing at scale.

Read more...
Vertiv Rack Extreme targets high-density data centre deployments
IT in Manufacturing
Vertiv has announced the Vertiv Rack Extreme, a next-generation rack platform designed for high-performance computing and artificial intelligence applications.

Read more...
Real-time monitoring and predictive maintenance in African data centres
ACTOM Electrical Machines IT in Manufacturing
Running a data centre in Africa brings many challenges. Traditional maintenance strategies struggle to keep up with these realities. Predictive maintenance offers a different approach.

Read more...
Yokogawa digital plant to accelerate green hydrogen revolution
Yokogawa South Africa Editor's Choice Electrical Power & Protection IT in Manufacturing
Yokogawa explains how a digital plant approach and autonomous operations can integrate the full green hydrogen value chain, from renewable power generation to end-use applications, and why digitalisation and system integration are central to making green hydrogen viable in South Africa.

Read more...
How integrated EMS platforms are redefining risk management in mining
Adroit Technologies IT in Manufacturing
As mining operations become deeper, more mechanised and increasingly data-driven, the role of technology in safeguarding workers has never been more critical. For Adroit Technologies, this shift has driven the evolution of its environmental management and safety system into a fully integrated, enterprise-level platform that supports both real-time safety and long-term occupational health.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved