Electrical Power & Protection


Producing solar hydrogen without platinum

I&C February 2026 Electrical Power & Protection

A research team led, by Chalmers University of Technology in Sweden, has presented a new way to produce hydrogen gas without the scarce and expensive metal platinum. Using sunlight, water and tiny particles of electrically conductive plastic, the researchers show how the hydrogen can be produced efficiently, sustainably and at low cost.


Hydrogen plays a key role in the global pursuit for renewable energy. Although its use produces only water as a by-product, significant challenges remain before hydrogen can be produced both on a large-scale and in an environmentally friendly way. A major challenge is the use of the metal platinum as a co-catalyst when sunlight and water are used to produce hydrogen. The Earth’s reserves of platinum are limited, and extraction is associated with risks to both the environment and to human health. Moreover, the production is concentrated in only a few countries, for example South Africa and Russia.

In a new study published in the scientific journal Advanced Materials, a research team led by Professor Ergang Wang at Chalmers, shows how solar energy can be used to produce hydrogen gas efficiently and completely without platinum. Chalmers researcher, Alexandre Holmes explains that the process involves quantities of tiny particles of electrically conductive plastic. Immersed in water, the particles interact both with sunlight and with their surroundings.

“Developing efficient photocatalysts without platinum has been a long-standing dream in this field. By applying advanced materials design to our conducting-plastic particles, we can produce hydrogen efficiently and sustainably without platinum at a radically lower cost, and with performance that can even surpass platinum-based systems”, says Holmes.

Cured fear of water behind the success

Efforts to overcome the platinum bottleneck have been underway for several years at Chalmers.

The key to the new approach lies in advanced materials design of the electrically conductive plastic used in the process. This type of plastic, known as conjugated polymers, absorbs light efficiently, but is typically less compatible with water. By adjusting the material properties at the molecular level, the researchers made the material much more water compatible.

“We also developed a way to form the plastic into nanoparticles that can enhance the interactions with water and boost the light-to-hydrogen process. The improvement comes from more loosely packed, more hydrophilic polymer chains inside the particles”, says Holmes.

When a lamp with simulated sunlight is directed at a beaker of water containing the nanoparticles, small bubbles of hydrogen gas almost immediately begin to form and rise through the water. The bubbles are collected and guided through tubes to a storage container, and the amount of gas produced can be monitored in real time. “With as little as one gram of the polymer material, we can produce 30 litres of hydrogen in one hour”, says Holmes.

Not only that, a recently published breakthrough from research colleagues at Chalmers shows that the electrically conductive plastic can also be produced without the use of harmful chemicals and in a much more cost-effective way.

Avoiding another expensive ingredient: vitamin C

The next major step for Wang’s group will be to make the hydrogen process work using only sunlight and water, without any added helper chemicals.

Currently, they use vitamin C, which acts as a so-called sacrificial antioxidant. By donating electrons, it prevents the reaction from stalling, which in the laboratory can show high hydrogen production rates.

To realise truly sustainable solar hydrogen, the goal is to split water molecules into hydrogen and oxygen simultaneously, with sunlight and water as the only inputs. “Removing the need for platinum in this system is an important step towards sustainable hydrogen production for society. Now we are starting to explore materials and strategies aimed at achieving overall water splitting without additives. That will need a few more years, but we believe we are on the right track”, says research leader Ergang Wang, professor at the Department of Chemistry and Chemical Engineering at Chalmers.

For more information contact Alexandre Holmes, Chalmers University of Technology, +46 31 772 34 10, holmesal@chalmers.se, www.chalmers.se




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Retrofitting for sustainability
Schneider Electric South Africa Electrical Power & Protection
As budgets tighten and sustainability targets increase, retrofit and modernisation strategies are gaining traction across Africa, allowing organisations to upgrade only what limits performance while preserving existing infrastructure and extending asset life.

Read more...
USB-Datalogger for voltage 0 to 30 V DC
Vepac Electronics Electrical Power & Protection
The PeakTech 5186 is a data logger for DC voltages from 0 V to 30 V with terminals on the top of the device.

Read more...
Pole-top boxes for smarter, more secure electricity networks
Electrical Power & Protection
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.

Read more...
Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.

Read more...
Engineering resilience into Africa’s energy future
Electrical Power & Protection
Zutari’s managing director of water explains how Burundi’s landmark Jiji and Mulembwe hydropower projects demonstrate what resilient, climate-adapted infrastructure delivery looks like – and what this means for Africa’s energy future.

Read more...
Voltage Tester with LED-Display
Vepac Electronics Electrical Power & Protection
The PeakTech 1094 is a reliable and robust two-pole voltage tester that has been specially developed for the safe and precise measurement of AC and DC voltages in the 12 to 400 V range.

Read more...
Schneider Electric launches circuit breaker for cost-effective LV protection
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its EasyPact CVS C4 moulded case circuit breaker in South Africa, extending the Easy series to 1 600 A and giving consultants, contractors, and end users a cost-effective solution for non-critical low-voltage applications.

Read more...
Schneider Electric launches cost-effective, high-performance LV protection
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its EasyPact NW air circuit breaker in South Africa, extending its Easy series portfolio with a cost-effective solution for non-critical low-voltage applications in commercial, industrial and residential projects.

Read more...
SF6-free switchgear brings digital intelligence to mining
Schneider Electric South Africa Electrical Power & Protection
Combining pure-air switchgear with embedded digital intelligence helps mines cut greenhouse gas emissions, improve safety and meet sustainability targets while enabling real-time visibility into critical electrical assets.

Read more...
Turning plastic waste into clean hydrogen
Electrical Power & Protection
Researchers have developed a solar-powered process that converts plastic waste into hydrogen and useful industrial chemicals while using spent acid from vehicle batteries. The approach could help create a circular system for dealing with several challenging waste streams at the same time.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved