News


South Africa’s first pilot CCUS research site

October 2024 News

In a ground-breaking move for South Africa’s climate strategy, the Minister of Mineral and Petroleum Resources, Gwede Mantashe recently unveiled the country’s first pilot Carbon Capture, Utilisation and Storage (CCUS) research site in Leandra, Mpumalanga. This landmark development follows the successful completion of a geological characterisation study, including the drilling of a 1800-metre stratigraphic borehole at the Goedehoop site, confirming its suitability for safe and permanent CO2 storage. This site represents a crucial step towards deploying CCUS technology as a viable solution to mitigate CO2 emissions.

It marks a significant milestone in South Africa’s CCUS journey, which began in the mid 2000s when the potential for geological CO2 storage was first identified. In 2004, the then Department of Minerals and Energy, in collaboration with the CSIR, initiated a study to explore the feasibility of CCUS technology in South Africa. This study, followed by the publication of the Atlas on Geological Storage of Carbon Dioxide in South Africa, highlighted both onshore and offshore storage possibilities in regions such as the Zululand and Algoa Basins. Since 2021, the Council for Geoscience (CGS) has spearheaded the pilot project, conducting extensive research to identify suitable geological formations for CO2 storage, under the mandate of the Department of Mineral Resources and Energy.

The completion of Phase 1 of the Pilot CCUS Research Project is a pivotal moment in South Africa’s efforts to combat climate change. CEO of the Council for Geoscience, Mosa Mabuza highlighted this achievement, stating, “With support from the South African government and the World Bank, CGS has made significant progress, including the completion of a comprehensive geological characterisation and feasibility study for the pilot injection plant. These findings reveal the site’s capacity to store up to 34 gigatons of CO2, paving the way for Phase 2, which will focus on the design, construction and injection phase.”

Minister Mantashe underscored the importance of the new CCUS research site in addressing South Africa’s status as one of the world’s highest CO2 emitters, particularly due to its heavy reliance on fossil fuels for energy production. “South Africa is responsible for approximately 500 million tons of CO2 emissions annually, largely from coal combustion. This initiative is a critical step towards reducing our carbon footprint,” he stated. “We urge all industry stakeholders to collaborate with us, providing the necessary financial and technical support to ensure the success of CCUS technology in South Africa.”

For more information contact Mahlatse Mononela, +27 67 426 1417, [email protected], www.geoscience.org.za




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
RS South Africa showcases industrial solutions at MTE Phalaborwa
News
RS South Africa recently showcased its latest industrial and electronic solutions at the Mining and Technical Exhibition in Phalaborwa in Limpopo.

Read more...
Specialised Exhibitions appoints Joshua Low as commercial director for Africa
News
Specialised Exhibitions has appointed Joshua Low as commercial director for Africa. This strategic addition to the leadership team comes as Specialised Exhibitions embarks on an ambitious phase of growth across the African continent.

Read more...
WearCheck earns Dissolved Gas Analysis accreditation
Wearcheck News
WearCheck is now accredited to perform Dissolved Gas Analysis for transformers, following a recent assessment by SANAS.

Read more...
From the editor's desk: Riding the hype cycle
Technews Publishing (SA Instrumentation & Control) News
The other day I came across an entertaining article on the ten biggest tech failures of the last decade. Google Glass, 3D TV and Elon Musk’s hyperloop have faded into obscurity. Others, like the metaverse, ...

Read more...
STEMulator – a gift to the youth of the nation
Editor's Choice News
STEMulator is a groundbreaking virtual platform designed to ignite the spark of curiosity in young minds and stimulate their interest in STEM subjects.

Read more...
A strategic milestone for Conical Technologies
Conical Technologies News
Conical Technologies has been appointed as the sole distributor in southern Africa for Mibbo, manufacturers of a vast array of products for the automation industry.

Read more...
Parker Hannifin brings advanced motion technologies to the World RX
Parker Hannifin - Sales Company South Africa News
Parker Hannifin is back on the FIA World Rallycross Championship grid to push the limits of sustainable performance in one of motorsport’s toughest arenas.

Read more...
Tapping into the laboratory economy
News
Africa’s fast-growing young population and enthusiastic adoption of digital technology could pave the way for the continent to fast-track science innovation and become a world leader in diagnostics, analysis and research. This is according to industry bodies, speakers and exhibitors at analytica Lab Africa, South Africa’s only trade fair for laboratory technology, analysis, biotechnology and diagnostics.

Read more...
Fuel your competitive edge with tech that transforms
News
The KwaZulu-Natal Industrial Technology Exhibition 2025, taking place from 22 to 24 July at the Durban Exhibition Centre, offers a vibrant, solution-focused platform tailored to the unique needs of KwaZulu-Natal’s industrial, manufacturing, engineering, maritime, agricultural and mining sectors.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved